UK-POLOS.NET - THE VW Polo Forum

I've got a hold of a set of gti headlights with ballasts and bulbs but I've not actually gotten around to trying them because of the time they'll take to fit. Worst case scenario and the ballasts or bulbs don't work then they won't be particularly cheap to replace. So... is it possible to tun an aft...

I have 62 brand new unused bbs split bolts for sale, m7 x24, for the rm's I believe, they're an eBay job cost about £45, I'll sell them for 40 posted. Anyone interested?

Any chance someone could Photoshop a set of bbs rx2s onto my 6n2 in gunmetal or anthracite grey? Photos are in my thread in mk5, any of the latest ones when it's lowered, on my phone so I can't post one
Cheers

I'm after a set of 56mm bbs centre caps or stickers for a set of bbs rxII's I'm refurbing, preferably stickers since the caps are fine.

Which aero blades are those? I unfortunately have valeo blades and the hook sits really high

Right, been neglecting this lately... First was sanding and spraying the standard steelies: http://farm9.staticflickr.com/8246/8513071938_c3f45ddc78.jpg IMAG0003 by Dalescottfk , on Flickr Then wiring in a new headunit and fixing this mess... http://farm9.staticflickr.com/8245/8511957663_b654f6a319....

Another thing is that I've had terrible mpg the past month or so, when I got the car I had almost 100 miles out of a tenner once, where as the other day I put in 35, I've done 166 miles and the fuel light is back on, which is awful for a 1.0 I have egr fault codes to fix, could the egr affect the fu...

So if I have negative camber then should I be pushing the strut further into the arch?

If I loosen the strut bolts to adjust the angle then won't the strut be loose...?

I thought of the two lower strut bolts one should be a camber bolt but it doesn't seem like it, how would I adjust it using just the standard bolts?

top mounts are brand new, haven't checked the wishbone bushes, really need the tracking done so I was thinking of just puting camber bolts in to adjust it

Yeah I know that, that's why the height isn't adjusted to exactly what I want it to sit at yet but there still shouldn't be that much of a difference, I imagine the track rod ends are fitted to the correct sides since there are no problems with the front left and it sits fine, ball joints were never...

Right, I have loads of updates to post but before that I have a problem... I had slight positive camber on my front right wheel for a while and it was causing tyre wear on the outside, fitted new coilovers, top mounts and bearings, rear bushes and track rod ends last night and now it's has seeerious...

How much for tyhe cup holder and coin tray posted to Falkirk, Scotland?

Look for some recommendations for a central locking kit, looking to convert my manual locks to central locking with a remote key. Also looking to find out how complicated this is to install?,