UK-POLOS.NET - THE VW Polo Forum

OK Alex, thank you.. I have organised it with a local garage near to where i work. He has looked after the csr for a number of years before i bought it and have vw experience too. So all being well Thursday should sort it
Thanks for you advice again Alex, its appreciated

Alex no I haven't ruled out the bearings, since my posting I have had the car up on a 4 post ramp and checked. New tyres all round have been put on as the car needed them. This has improved things no end, but there is a vibration that can be felt if you put your hand on the spring when the wheel has ...

Hi all

can anyone on here help with this please, I have problems with my polos front end regarding vibration. I have gone through all the usual and obvious reasons, tyres, wheels, ball joints, right through to replacing inner and out cvs on both sides.
I have had the problem diagnosed as being ...

HELP!!!!

I have a vibration on the front of the car, initially after doing all the usual, wheels and tyres checked and balanced all bushes and ball joints checked etc, it became the drive shafts turn. Pulling on the drive shafts play was found when you moved them up with some force, drivers side ...

alexperkins wrote:Same engine predominantly

You would need to swap the ECU to match the engine but all the plugs should be the same

These engines are good for 200k+ miles if they are properly maintained.

Thank Alex, the reply is appreciated.

Any one who can help here please, one of you must have an idea, wish I had but, the more I look the bigger the hole of lack of knowledge comes back....

Any one who knows please can you enlighten me!!!!!!

Hi All
A question from a newby on here

What is the difference if any between a 1.4 8V AKK and a 1.4 8V AUD engine, from the limited information that I can find they are both 8V obviously but both have 60BHP, yet there are ECU's for the AKK and AUD...

Just curious as thinking of buying a spare ...