Yes, I understand what you mean, factory quality control usually avoids those circumstances.
Protective measures are usually applied.
Search found 7830 matches
- Mon May 20, 2024 10:57 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Giannis20vt's Polo 6c 1.0MPI
- Replies: 134
- Views: 63488
- Mon May 20, 2024 5:40 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Giannis20vt's Polo 6c 1.0MPI
- Replies: 134
- Views: 63488
Re: Giannis20vt's Polo 6c 1.0MPI
The distance/gap between electrodes is determined by the spark plug manufacturer and cannot be modified under any circumstances , as this would damage the electrodes. Within the three possibilities for your engine, 04C905606A -in use-, 04C905616D -retired-, 04C905616A -retired-, the distance between...
- Thu May 16, 2024 8:27 am
- Forum: I used to own a Polo, but now I own a...
- Topic: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP. 🧙♂️
- Replies: 694
- Views: 337442
Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP. 🧙♂️
Golf 7.5 (3Q0) New Start/Stop memory module. Previously (1, image below): https://uk-polos.net/viewtopic.php?p=604231#p604231 , https://uk-polos.net/viewtopic.php?p=604266#p604266 https://i.imgur.com/WDrxRVA.jpeg I have purchased and installed a New Memory Module for the Start-Stop button (2, image...
- Tue May 14, 2024 8:13 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Anyone Replaced the Gear Stick Gaiter on Polo 6c
- Replies: 12
- Views: 1178
Re: Anyone Replaced the Gear Stick Gaiter on Polo 6c
Patience and Buddhist level meditation to recently get a Chinese electronic module working took me to the Next Level, I am now open to any invention of any provenance...
Thanks for sharing your experience!
Thanks for sharing your experience!
- Tue May 14, 2024 7:31 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Strange but brief engine cut out after 10 minutes
- Replies: 7
- Views: 897
Re: Strange but brief engine cut out after 10 minutes
Just as a suggestion, clean the original wiring connectors for the new crankshaft and camshaft sensors with residue 0 contact cleaner, and check that the contacts are not displaced from their housing/position in the connectors.
- Tue May 14, 2024 6:56 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Model identification
- Replies: 4
- Views: 387
- Mon May 13, 2024 6:23 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: V-Belt life time
- Replies: 4
- Views: 409
Re: V-Belt life time
Being a belt that is 'exposed' (relatively), its durability will be more conditioned by the places of operation (weather, dust, etc.) than by distances or work time. I don't think a lifetime limit can be defined for this belt. Inspecting it will take you the same time as changing it, I would replace...
- Sun May 12, 2024 7:46 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Polo BlueGT 2013 Xenon retrofit
- Replies: 5
- Views: 416
Re: Polo BlueGT 2013 Xenon retrofit
If you understand the scheme, you already know all the work to be done in the engine area. You will have to make modifications to the original wiring and add the auto-leveling wires to the T14 connectors. https://drive.google.com/file/d/0B2nv91Y7YYCbQklyc19UMVlaeUE/view?usp=sharing&resourcekey=0...
- Sun May 12, 2024 2:13 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Oil Filter removal
- Replies: 9
- Views: 668
Re: Oil Filter removal
CFWA? https://i.imgur.com/j8rpS2A.jpeg 1- You must make sure that the renewed parts are compatible/correct. Use the original references according to engine code to buy the parts to be renewed, ... original or aftermarket. 2- You must make sure that no old seal is left in the container/hole/duct for ...
- Sat May 11, 2024 4:48 am
- Forum: I used to own a Polo, but now I own a...
- Topic: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP. 🧙♂️
- Replies: 694
- Views: 337442
Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP. 🧙♂️
Golf 7.5. Left rear level/height sensor/sender replacement (G76). 5Q0907503 (5Q0512521E). 5Q0907503 is the level sensor - used for the front or rear axles -. 5Q0512521E is the parts assembly for a rear torsion axle. Since I had the happy idea 🤭 of cleaning the rear axle with high-pressure water jet...
- Fri May 10, 2024 7:37 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: UkPolos appreciation post!
- Replies: 4
- Views: 318
Re: UkPolos appreciation post!
Thank you for your great and valuable contribution.
Good upgrade. Enjoy it!!!
- Fri May 10, 2024 7:14 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Polo BlueGT 2013 Xenon retrofit
- Replies: 5
- Views: 416
Re: Polo BlueGT 2013 Xenon retrofit
There is only one way to install bi-xenon headlights on the 6R, 'the right way'. - MY scheme is ideal for your BlueGT. - Your BCM and your BlueGT are suitable for this retrofit. Bixenon, automatic headlight leveling system, ... automatic lights (dimming mirror + R/L sensor). - If Ali's looms are acc...
- Fri May 10, 2024 6:36 am
- Forum: I used to own a Polo, but now I own a...
- Topic: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP. 🧙♂️
- Replies: 694
- Views: 337442
Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP. 🧙♂️
Testing the height of 'my' DCC damping. Test on a standard pedestrian sidewalk height. https://i.imgur.com/aUwV0PY.jpeg https://i.imgur.com/KMnvjzP.jpeg https://i.imgur.com/bKVRMzO.jpeg 👍 I still have to do another 1000kms for the front shock absorbers/struts to lower a little more. (5 to 10mm) It'...
- Wed May 08, 2024 1:19 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: 6R Cruise Control Retrofit Problems
- Replies: 575
- Views: 164901
Re: 6R Cruise Control Retrofit Problems
Good info, thanks!
- Sat May 04, 2024 2:57 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Polo Rear Lettering Location
- Replies: 2
- Views: 456