UK-POLOS.NET - THE VW Polo Forum

Since it is a 2014 model there has been no recall from VW.It was only for specific vin numbers till 2010.

First of all i want to say thank you guys for your help :) I am sure that the noise comes from the little plastic covers that these things have and stick to the metal of the rear hatch. At first i thought it was the rear seatbelt mechanism but i recently replaced them all and immediately after leavi...

Hmmm thank you.
Would it be possible to unclip them and put them backin place in order to try and fix the rattle?

Are you sure? Because they are very thin for any wires to be passing through them.

Could someone tellme what are the little plastic pieces on each side of the rear window?
Can they be removed?
I've been hearing a rattle for a while now and i realised that it is coming from these things.

I think there's something wrong with the brakes or the brake pedal.Turn on the volume so that you can also hear a little whistle it makes.
https://www.youtube.com/watch?v=_DSnw2eZC8I

It's not about the oil about it has to do with maintenance so i think it would be better if i asked here.

I have a 2011 6R 1.2tsi with 105hp.What type of brake fluid do i need to buy?

I think it works if the car is fitted with rain sensor for the wipers.

Hello guys.I found out that the code of the oil filter on 1.2 tsi polos has changed since July 2010. It started as 03C115561 B and since then the new one is 03C115561 D . I bought my car in April 2011.In many parts of the car i can see written May2 2010 but the 10th letter of the VIN Number is a B w...

If i disconnect the no.56 fuse in order to switch off the daytime running lights (1.2 tsi sel) will there be any problem? Do i have to do something else via VCDS or any chance of an error on the instrument cluster?

I managed to finally separate the original knob from the leather and here are the results:

So,i've tried literally everything but i cannot get it done even with the ''French'' way without doing any damage.
So i'm trying to find the part number of the gaiter now.

I'm trying to get rid of the standard knob and put on the knob from an A1.The best way to do it is the one shown in the French forum and it also requires a lot of time.But I've found out that if you choose to use a screwdriver to unclip the black plastic ring,it is very possible that you'll break so...

On the last photo,that's exactly the swap i'm trying to do.But polo's plastic ring even cracked a little bit .So i guess i'll order another gaiter in order to fit the a1 knob on it.

Any ideas? Even at the service they didn't know how to do that :/

Lumia 820