UK-POLOS.NET - THE VW Polo Forum

Hi, I have tried changing my heater matrix in my 9N3 Polo Dune, I just cannot get it to re-seal. Where the neck of the matrix petrudes from the main body it has a 5deg tilt . Should the neck be angled up or down? I have tried to get it to seal about 6 times with it facing upward without success. Has...

Hi guys, just removed and flushed the heater matrix, cant get it to seal.
The angle on the neck of the matrix points up or down, which way do you angle it please if anyone knows?
Thankyou

Hi there fellow polo owners. H have a Polo Dune 1.4 tdi and the heater matrix was blocked. I bought a new matrix and refitted it as the old one was removed. For the life of me i cannot stop it leaking into the engine bay. Ive reseated the pipes at least 5 times without success. Any help will be grat...

Hi guys hi girls! I hope for my sanity someone can help me! The rubber grommet of my Polo 9n3 aerial was perished so I set about replacing it. I unplugged and removed the aerial, to clean around the hole in the roof. Anyway i put it back together in reverse order. Turned on the radio... nothing but ...

Hi there umar-dub I have read your post as i am having the same issue. Where abouts was this dodgy cable you found? I've topped up the fluid with no change, I can't see any issues with the wiring going to the pump. I'm pulling my hair out! I've scanned the car, no faults found even though the power ...

Hi there, thanks for your reply. I have 1.4tdi pool dune. I have scanned the car and got no fault codes at all. The light comes on within 5 minutes of driving. I have inspected, but not removed any connections from the pump as they looked in good condition. It's driving me nuts not knowing why it's ...

Hi there guys, my wife has a 2007 vw polo dune 9n3, the power steering light is intermittently coming on after about a mile, yet it resets when I turn off the ignition. I've checked the fluid & it's fine, I've inspected the connections on the pump & they look good. I've been trying to find t...

Hi there guys, I live in South Wales & am wondering if anyone knows how or where to splice my shiny new brake pad wear/ speed sensor cable ( 6Q0 927 903 S ) on my vw polo 9n. I've had a mechanic turn the job down today as he couldn't see a way forward.
thanks in advance for any info.

Hi there guys I have a question that I may already have the answer to. My wife's Polo Dune has had the brake wear indicator cables soldered together & put into a crimp thus making a circuit yes, however this hasn't stopped the brake wear indicator light coming on. The cables have been soldered f...

Hi there guys n girls, I wonder if any of you out there will know how to change the front sidelight bulb on a 2007 VW Polo Dune or MKIV Polo. I have tried to see how to remove them but on the offside there is a fuel filter & filter mount blocking any way of finding where the wiring actually goes...