UK-POLOS.NET - THE VW Polo Forum

Since I last updated I fitted 312mm brakes and 6C GTI bumper To fit the 312mm brakes I had to swap the hubs, the ones I got came off an A1, one side was from a 1.6 tdi 105ps and the other from a 1.4tsi. The calipers and carriers are off a mk1 Leon Cupra. The 6C GTI bumper needed new bumper guides. I...

Finally got the part, iichel was right as always, the part number for the 6c is: 6C6807441 B 9B9

Hi guys, Recently fitted a 6c gti bumper to my 6r, however it came with a section of the diffuser missing, see below. Been trying to find a part number for that section which covers the tow eye for the past 2 weeks but can't find anything. I think the diffuser is available as a whole section, before...

Thanks, I might head down to a dealership and check if theres a part number stamped on the piece on one of their cars

Jep running 145hp with only bigger airbox/intake duct. Was a cr105 but it is the same engine. Stock internals can take 200+hp but without some serious hardware 145 is the max you can get out of it. Yeah mines been running fine for almost a year, tempted to do the CR177 turbo and supporting mods pos...

That looks pretty much like my 6c - I don't have a flat plate covering the end hole? There's a split just right to the centre of the diffuser, you can just about make it out on the images on the first post. See images below for the part missing from my bumper. My best guess would be: 6C6807441 B 9B...

Recently fitted a bumper from a 6C GTI. The bumper came with the section of the diffuser which covers the tow eye missing. It is a flat piece which clips in completing the diffuser. Does anyone have a part number for this? I have attached images below of what I am talking about Thanks http://i1074.p...

No the strip underneath the tail light on the 6C differs from the 6R Thanks, just realised you answered this question in a different thread about a year ago. You said this lip can be changed, I'll look into this. Reversed into a bollard yesterday and ruined my rear bumper :oops: seen a gti 6c bumpe...

As above, does anyone know if the rear bumper from a 6c GTI fits a 6r? Are the fixing points the same?

The up to 929kg springs would be correct for the 1.2
The over 930kg springs are for the heavier diesel and gti models

I've got 35/55 with 7.5 et38 18" wheels and never rub even with 5 men in the car. It's not very comfortable mind Saying that you might have a problem with the wheel specs you've quoted. You're wheels will be 9.3mm further out compared to mine and I have considered 10mm spacers for mine but I th...

Nice work on fitting the carbon airbox, did you notice much of a difference after fitting it?
What work was involved to turn the battery 90 degrees?
My 1.6 tdi pushing similar power as yours, 145bhp/320nm

18 at university, 6R 1.6 tdi

Love the seats, what car are they from?
Ive got a set of 312mm brakes+ new hubs from the 105ps a1 ready to go on my 1.6 tdi, do you have to swap out the hubs on ur polo too? I'll probably be fitting mine sometime in the spring

A tdi polo 6r to complement your gti?