UK-POLOS.NET - THE VW Polo Forum

it's either the emblem that doesn't send the signal or the lock that failed. it's hard to say which one it is, but the lock is more prone to failing, generally speaking.

as long as you don't turn the key with the wires disconnected, it's alright

Your Polo does not have a dimming function for the exterior mirrors, only heating

i guess the AC thinks the engine must keep running to keep the climate inside acceptable
as far as steering angle goes, I can only speculate...

Cheers. Good luck.

The slip ring in the 6c is basically just a cable. You just need to center it properly. Otherwise just screw the old one off and the new one on.

ODIS service with online connection. Or get it hacked...

I suppose the first step would be to ask why the coding was lost.

well done

Thats also a 6.5

If the screen resolution is a match, you might have a more-or-less plug and play swap. Make sure you have the correct adaptations/codings. You'll probably be able to remove cp. Go for a dab 5f module if you see chance.

if you get a wiring scheme, it will be very easy to make your own wiring. or buy a pre-made set, they often come with instructions. i never did this on polo aw so i have no experience.

No you will need a new airbag too

coding will probably be:
- add 19 to the gateway
- look in adaptations for 5F
- maybe engine controller
- maybe instrument cluster
- maybe trailer module

it's not super difficult, i'm sure you will be succesful

The latest is the E at the end, depending on your needs, perhaps a B would be sufficient already. But new is always better.