UK-POLOS.NET - THE VW Polo Forum

As far as I'm concerned, the prettiest front of the triplets, the facelifted Mii. It's a replacement for her 2006 Citroen C1 that was falling apart just about everywhere. And happy she was! https://i.imgur.com/IhtXNr7.jpeg The car is a pretty nice trim as well. 1.0 MPI engine with 60bhp Start/stop s...

You'll be fine. Best practice would be to first disconnect battery minus, then anything else.

well done. i'm impressed. good job

The latest breed of VW cars don't have headlight washers anymore, probably as a cost-saving measure. Little that I knew, my latest BCM doesn't have the little PCB components on it anymore to operate the pump for that. So... after some research, the missing components were quickly transferred from a ...

i guess that calibration is not possible without correct dataset

congratulations on a good retrofit and an even better explanation. bravoooo

i'm really curious how the mirror will look when its' finished. well done.

You can get a wiring diagram on Erwin for a few euros

mfsw depends on the bcm thats in your car
swapping the cluster probably needs a new cluster but is not impossible

fleece is indeed the correct one for AGM. That's good.

did you check the fuse? i think it would be good to change the battery type to AGM in your coding. otherwise the car will charge it like an EFB. that's not very ideal.

That's a very cool steering wheel. Will you connect the heating?

I think it should have +30 as well on one of the two ports but I couldn't find a wiring diagram that showed it :lol: Another mod I anticipated and wanted for a long time: OEM rear sun shades, retractable into the door https://i.imgur.com/twq0CSE.jpeg I needed to replace the entire door trim for this...

what you saw was probably 'cold' diagnostics when the car is checking the lights when they are off.

Skoda has this super handy USB-C port in the mirror cover that can power a dashcam. It's in the latest Superb and Octavia. Of course I needed to have it as well and since today, I have it. I cut the usb socket holder out of an original mirror base and glued it into the Passat mirror base, it was the...