UK-POLOS.NET - THE VW Polo Forum

there seem to be so many! does anyone know what polo models a DXK gearbox fits? i do know it mates to an AUD engine thats common to the 6n2 and the ibiza but does it fit any other polo engines?
cheers

recently purchased a 6n2 for my daughters first car, a non runner that the seller claimed just required a new engine speed sensor (diagnosed by vw main dealer) but they lacked the know how to change it and the garage qoute wasnt worth it with the value of the car, they even sold me the car with a ...

yet more woes with my sons polo, his clutch cable snapped on his way back from dubclub. we replaced the clutch cable after we'd towed it home and found we could no longer select 1st,2nd,and reverse gears. some investigation later i worked out i could manually select ALL gears under the car by ...

RESOLVED!
decided to service the car today and have another stab at fixing the issue after changing the oil,plugs and filters etc
While we were running on tickover to warm up the oil for draining, we could clearly hear something sparking periodically down the back of the engine. An investigation ...

Okay so we have replaced the immobiliser and the immobiliser ring and ECU and the key chip but the problem still remains the same.does anyone have any ideas on other areas we can check? We have already checked all of the wiring loom and can find no problems

ok, so anyone know what is the difference between the AUA and AHW engines when they are both 1.4 16v? ive located a full ecu kit but its from the AHW but my sons is the AUA according to the boot sticker..

alexperkins wrote:I don't believe so. That was brought in on later models

ok thanks chap much appreciated

Many thanks for the replies its much appreciated, do i need to replace the speedo/rev counter binnacle also? someone has suggested i do? just wanted to check before i buy

still not making any progress with this despite checking all the connections and wiring as much as is possible. i have revisited the immo ring after Alex's advice and it quite wobbly but ive no idea if thats normal or not?
if i source a new immo ring and key chip second hand would i also need the ...

Hi,
Is anyone familiar with this fault? its causing the engine to cut out occasionally sometimes over bumps sometimes around corners. it makes 3 beeps when it cuts outs and can always be restarted, but its getting progressively more and more common now, doing it several times in a 30 min journey ...

thank you for the advice, ive ordered all the belts, tensioners and a water pump.

cant find any old posts covering this topic, is it possible to change the timing belt and tensioners without removal of the crankshaft pulley? just wondering if i need to order a tool for removing the pulley bolt or not? its a 16v 1.4
cheers

correct clips sorted and fitted, windows now working perfectly. thank you for all your help

yes i know...groan... but can anyone whos been down this road and is more familiar with the plastic clips that locate the glass on the sliders give me some tips? i ordered these: http://www.ebay.co.uk/itm/191422810912?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
off ebay, it says they ...

so i climbed into the boot through the rear seats and fairly easily flicked the locking lever over with a screwdriver and can now open and close the boot, but now when i put the key in the boot lock it will not turn in either direction so i now cant lock the boot! ive located the vacuumn pump and ...