UK-POLOS.NET - THE VW Polo Forum

Ty....yes indeed it is. Any suggestions?

@Ciclo, @iichel 1) Check Below Picture of GPS Antenna for MIB 2. Any idea where can it be press fit in polo 6R? Hello rdasadia!... this is patil :) I have a suggestion for installing GPS antenna for your MIB2 in your 6R. :D You can buy a OEM sharkfin antenna with rod(part number in picture), which ...

Take the feed for ambient lights from the T6/3 wire in dimmer connector (signal 58), take this new wire to the fuse 1, slot SB1a, install a 5A fuse, from slot SB1b run the wire to T4/2 connector. T4/1 is ground. T4 connector 8K0973754 Note: AliExpress T4 connectors have the numbering in reverse ord...

@ciclo @iichel Working on ambient lighting in my polo 6R. Request following clarification, 1) Have already procured 7P6 919 390 A (KT1). However I assumed they will supply female connectors also, but haven't. Please tell me the part number of matching connectors. 2) Have understood almost all wiring...

My RLS & dimming mirror are factory fit. VW started giving this in all GT TSi from 2016 onwards Still any suggestions to try any other coding for subsystem 2 & 3 please to enable auto function Hi rdasadia, Do you have rain closing working in your car? Mine has factory RLS and rain closing i...

1) BCM : Byte 71 Bit 7 enabled: Works fine now. 2) I completed installation of AFS. However I am unable to code the AFS module. The module is bought directly from a VW dealer from China. Please check the attached picture. I have checked both "Yes" & "No" option as mentioned i...

Hi rdasadia, please refresh my memory. - Have you installed the Bixenon headlights? (and you have not powered the SCLs in the bixenon headlight connectors :) ) - Have you removed the yellow/white wire from the RED connector Slot 3? ... or never installed when you did the BCM adaptation... (orignal ...

How to install 7E0937090B BCM Max in 2016 Polo 6R RHD non Bluemotion. Halogen headlights. (rdasadia) Preview. 13 pages https://i58.servimg.com/u/f58/18/94/39/39/previe13.png :arrow: View or download here [youtube]https://www.youtube*.com/watch?v=9ExrrmbJ82c[/youtube] @Ciclo, @iichel 1) Check Below ...

Pranay,

No it cannot work!!
To my knowledge I haven't come across such modification probably cause its too expensive with no surety it will work

iichel wrote: ↑Sun Feb 24, 2019 7:06 am It's also very unlikely that the Abs and power steering of the 6r would support pla2.0

Absolutely, 6R does't have steering module to support this and PLA rear ABS sensors are different having higher refresh rate for detection of wheel movements

I'm afraid not. :| Look here , on a Golf VII. This way you already know what is necessary. --- Btw, your wiring looms is already made. I will inform you by email. :wink: (I still have to do the installation guide) Ya I know these parts of PLA2.0 , i have retro fitted my Superb & Yeti and PLA 2....

As Ciclo rightly said polo 6R cannot support 12K PLA 2.0. The module requires separate CAN. You can maximum install the eight sensor configuration. Some pictures attached

ciclo wrote: ↑Sun Jul 15, 2018 7:27 pm It's a pleasure to help you.

Please, keep me informed of your progress. Thanks.

So I will...

ciclo wrote: ↑Sun Jul 15, 2018 6:47 pm Two PDFs sent.

... download them for easy reading.

Thankyou so very much!!

Hey Everyone,
I need pin out for the following modules.
Can someone help me with it.

7E0 919 475 J
1K8 919 472 C