UK-POLOS.NET - THE VW Polo Forum

I had the same sounding problem, I simply changed the fuel filter and all was good! I think it was clogged so no fuel was getting to the engine.

Sent from my ONEPLUS A3003 using Tapatalk

I originally thought that until we attached jump cables and it started straight away and found disconnecting ...

So have had issues recently starting my 9N. The starter turns but the engine just wont fire. If i leave the batter disconnected during the day it works when i try to start but if i leave it on it will not. Have put the batter on charge after that and it was not empty. I think it might be the ...

Hi guys,

Had the 1.4 TDi checked over before the mot in sept and the bushes have gone on the trailing arms (along with the tracking rod ends).
So i found this on eBay
http://www.ebay.co.uk/itm/371499235361?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
but the guy said i need to replace ...

Hi guys.

So on the alarm fit but i can not find the grommet for where the power cable comes into the car itself. i have looked at following the wires and they seem to go down and undeter the engine. Is the grommet behind the centre console?
where would you recommend putting the cable through to fit ...

Ok so the "vehicle specific installintion instructions are as follows below"

VOLKSWAGEN POLO

LOCATION

Compact alarms and sirens Control units and modules

RUNNING OF ALARM WIRING SUPPLY

Positive and negative

PROVISIONAL

- Year of registration 2002 - 2005
On the driver side shock absorber ...

hI,
Thanks for the reply, i have requested this but no message back from them so far. I'm glad it isn't just me that thinks it is vague.
Thanks

Good morning,

I have just bought a 2002 1.4 TDI Polo and want to fit a remote lock and alarm kit i have. The kit i got off ebay is a steellion steel400B. i had a search on here for the wiring specs but there is so much info on here i couldn't find it. DOes anyone have any usefull info on fitting a ...