UK-POLOS.NET - THE VW Polo Forum

From my workshop manual for a 6R Polo -
splash/stone guards 12Nm
hub nut first stage 70Nm second stage angle-tighten a further 30degrees.


Thanks RUM4MO anyway are you sure about 12Nm? Those bolts holds the rear stub axle to the beam and in between there is the splash guard.

I've read about ...

Hello mates, my name is Roberto I would like to share with you my rear brake upgrade

I have been doing some research and finally put together all the stuff needed to do the upgrade:

Discs
Calipers and carriers
Pads
Spash shields

I will share the part numbers in a while, I've already done the ...

Good job! . Thank you for the report! The need aroused your senses. :lol:

Have you visually checked that the wire for warning light of rear fog light is present in the instrument cluster connector (T32/13)? :)

No I have not. How can I be sure? I tried but I wasn't able to see the connector from ...

Hello guys sorry for my late reply, I have been quite busy lately.

I have done all the connections as Ciclo said and IT WORKS!! :D:D:D :lol:

however at first step the "new rear fog light bulb" was white I replaced it with a red led bulb and now it looks like this:

http://imagizer.imageshack.us ...

ciclo wrote:Yes.

By the way I can't see the diagrams of the 'right way' to do the wiring anymore. Could you please share them again?

I love the new functions of the lights and DRL you sent me

Regards

I made a double check about the handbrake, it was on, that's why DRL went off :lol: lol

So if I understand correctly I dont need to 'activate' the rear fog light by turning on a bit, right? Just do the wiring? I was going to do it this weekend but I wasn't able :(

If so I will let you know the ...

My DRL went off but the CH is active now

Chassis Type: 6R (6N0)
Scan: 01 02 03 04 08 09 15 17 19 25 2E 44 55 56 77 0B

VIN: WVWEP76R7EY153726 Mileage: 65210km-40519miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK ...

Post here an Autoscan.

There you go

Wednesday,11,January,2017,20:02:59:49450
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 16.8.0.3
Data version: 20160803 DS255
http://www.Ross-Tech.com




Chassis Type: 6R (6N0)
Scan: 01 02 03 04 08 09 15 17 19 25 2E 44 55 56 77 ...

Done, I also activated the speed dependant wipers and switched the XDS to strong even though I haven't make a test yet.

what byte should I look for the tail lights configuration? I could not find it

an intermediate solution would be a red LED light in the left rear light unit.
http://vapingunderground.com/data/attachments/5/5293-da8db74802cecd39f24513553b8e4db7.jpg ...

Sorry I missunderstood the proposal, I think i will not replace my taillight, I will only do the wiring and replace the ...

iichel wrote:an intermediate solution would be a red LED light in the left rear light unit.

I think that is the easiest and cheapest solution. I'm going to do the wiring and replace the reverse light bulb.

Thanks iichel

Thanks ciclo! I will work on this and let you know the results

Just purchased the VCDS 16.8 is that ok? :?

these are my taillights, they both have reverse lights function

http://imagizer.imageshack.us/v2/640x480q90/924/tPCWD1.jpg

and this is my cluster

http://imagizer.imageshack.us/v2/640x480q90/921/j64SuE.jpg

I was able to download the wiring manual ...

Gracias ciclo!

My GTI came with xenon and cornering lamps from factory

http://imagizer.imageshack.us/v2/640x480q90/921/lvXzAn.jpg

BCM PN is 7H0937090B

http://imagizer.imageshack.us/v2/640x480q90/924/XAdmkw.jpg

As I mentioned it doesn't have the wire in the cavity 9 of the light switch ...

Im looking for electric diagrams for my GTI 6R, does it worth the cash?