UK-POLOS.NET - THE VW Polo Forum

ciclo wrote: ↑Fri Jun 22, 2018 5:50 am It could be.

If you mean this T14 connector. No. (11/2011-->)
If you mean this T14 connector. Yes. (-->11/2011)

So this is the correct one

ciclo wrote: ↑Fri Jun 22, 2018 5:18 am SB10b is the right place, +15 signal.
Use the JPT contact-terminal (0.5mm2 wire).

Thanks for reply ciclo.
Is it the same crimp used in T14 connector?

Hello everyone finally I received all required parts for AFS installation on my vento I have few queries regarding installation.
1) Can I take Power from SB10 ?
Fusebox pic attached
2) Which crimp I need to connect wire to fuse box ?

Safe lock depends on coding ?
My doors also opening from inside when locked by remote
Which byte in central electronics we need to change for safe lock ?


Sent from my Pixel 2 XL using Tapatalk

Excellent job madwarlock...,,[emoji106]
U don't need to change stalk ?


Sent from my Pixel 2 XL using Tapatalk

Hey guys, I have one AFS unit 6R0907357C for sale. https://s14.postimg.cc/kztdkp0pd/6_E1_F6_CA2-1_E89-4_AE0-_A743-_CC0320_C0506_A.jpg I have bought it by mistake and couldn’t use it for my Polo.(need parameterization) So I bought another used 6R AFS unit.. If someone needs it, contact me 😉 Hey cicl...

ciclo wrote:[emoji38]
0.35... but 0.5 is fine ... a more usual wire size.

Ok thanks...

Sent from my Pixel 2 using Tapatalk

ciclo wrote:

[emoji23]
Of course length will be as per requirement
I mean thickness 0.5sqmm or 0.3sqmm?

Sent from my Pixel 2 using Tapatalk

What wire size should I use for making harness ?

Sent from my Pixel 2 using Tapatalk

..... I think firegrafik is the most indicated to tell you what parts you need. The parts needed for AFS Polo 6R Sedan are not the same as for the Polo 6R hatchback. More info here :arrow: https://www.drive2.ru/l/7316241/ Unfortunately I haven't still finished wiring from AFS unit to the sensor. Ne...

I don't have the AFS diagrams for POLO sedan, but the following are applicable. J431 control unit. T26. left bixenon headlight https://drive.google.com/file/d/0B2nv91Y7YYCbWXJNdGJodzU4OXM/view?usp=sharing right bixenon headlight. G76 = rear sensor. https://drive.google.com/file/d/0B2nv91Y7YYCbZlA4R...

Hi ciclo , Firegrafics & iichel I want to install AFS to my vento (polo sedan ) My vento is fitted with Bixenon with led DRL Module , sensor , sensor bracket I got I want to make it's wire can you help me to get connectors of module,sensor and it's wiring diagram? Thanks in advance Regards Shardul

Does anybody knows why , at least my ic, has dual color leds for backlight?? They are all exactly the same, look. https://uploads.tapatalk-cdn.com/20180430/9ffd6a6506268ffe3ada41506510a2dd.jpg https://uploads.tapatalk-cdn.com/20180430/9b7c025e361679884a296f26436b07b3.jpg Enviado desde mi iPhone uti...

Backlight bug is solved! 02F9 — xxxxxXxx it’s necessary to switch bit 2 to 0 This bit is switching off dials backlight during NeedleSweep. My value was 7Е, changed to 7А Now NeedleSweep is ON and backlight not blinking any more! :wink: Solution found by aadriver For dials backlight during needle sw...

Hi. I have installed BCM MAX 090 D in Polo sedan in India. Shardul is my friend. The car is same like sharduls car except it have normal fog lamps while sharduls car have cornering fog lamps. I have just changed canbus lines from bcm to instrument cluster for now. I have done same thing on one more...