UK-POLOS.NET - THE VW Polo Forum

Hi guys, I've got a amarok cluster 2h0920871b for retrofitting in my 6r. It have a 1009 sw and i cannot set immo data on it, so I want to downgrade with 0729 sw. Could someone explain me how to do that with odis e? Thank you


What problem you are facing to set immo data ?
I have 1009 FW and ...

Hello

Is address 01 enabled in the gateway installation list?
Have you installed new CAN lines for the Instrument Cluster when you installed that new BCM (Max)?

Please, post a recent full autoscan. Thanks.

hi
thanks for your reply.
01-ecu is enabled in the gateway list, and cluster can lines ...

hi everyone,
i want to ask a question about the ECU problems after 7H0937090D upgrading on my Fabia MKII from Chinese Market.
after this upgrading, both vcds and 5054A can not access 01-ECU, both return "no response" when try to access ECU. Does anybody could give some suggestions, if he/she has ...

Hi, everybody.
i write here for help of searching the firmware 1xxx for Fabia mkII.
My friend is working on ACC & Lane assist on his Fabia MkII, but according the post on D2, the firmware shoul be 1xxx at least. Then i did the search with google, but nothing found.
MadWarLock suggested that i could ...

Thanks Fernando, I’ll get looking for his post and see if I can get them all added
Ah yes I forgot all about the hazard button illumination! I’ll be sure to add that aswel


BCM PQ25 7E0

Byte29 Bit6 enabled, operates the MFSW buttons on the right side of steering wheel when the LIN dedicated ...

MaDwArLoCk wrote: Mon Jun 11, 2018 10:41 am

blue_ming wrote: Mon Jun 11, 2018 1:55 am
hi MaDwArLoCk,
Thanks for your reply.
i think the Shift Display is OK for me, but i also want the eeprom to do some research.
i'll send my mail address later via pm, if i have the rights to do.

Check your PM

got it.
thanks for your files.

hi, i from China with a Fabia II, retrofitted with MFI cluster which i think is simillar to the 6R.
i tried to enabled the gear shift display on it, but don't know how to do it.
could you please give some suggestions about it?

Best Regards.


Hi blue_ming,

spacewalker is mainly right!
Gear ...

yes, it's not "bluemotion".
is it possible that do some modification in eeprom or something else to enable the ECU to send the info?


of course, but in ECU
you can compare BMT ECu with your current and start copy / paste memory


thanks for your reply.
but i can't find any BMT of Fabia II in ...

hi, i from China with a Fabia II, retrofitted with MFI cluster which i think is simillar to the 6R.
i tried to enabled the gear shift display on it, but don't know how to do it.
could you please give some suggestions about it?

Best Regards.

that info is send from ECU,.
if Your ECU is not ...

My IC was updated! 8) :D

https://s18.postimg.cc/m00od6a0p/720_BADA9-3_FC6-4139-_B241-30_EFF6_ACCAFB.jpg

And Direct TPMS now working!

But after update I got “backlight bug”

https://www.youtube.com/watch?v=pBu55yByTNM

Backlight starts flashing... (probably because of light sensor)
To fix ...