UK-POLOS.NET - THE VW Polo Forum

62DD2C63422303C0461A346C4254C0800905 62DD2463422303C0461A246C4254C0800905 try these two codes please + full autoscan of current state. The 2nd code is accepted. No error codes in abs pump. Thank you very much for your help. Btw, is the following enabled? -Tpms -HHA -XDS -full ESP off Sent from my i...

iichel wrote: ↑Tue Sep 11, 2018 3:56 pm 62DD2C63422303C0461A346C4254C0800905
62DD2463422303C0461A246C4254C0800905

try these two codes please + full autoscan of current state.

will do so. thank you for the speedy replies!
cheers!

Hello guys, i'm in the midst of upgrading my polo sedan abs pump to an esp 9.0 pump. i have already successfully retrofitted the G85 steering angle sensor. my new pump part number is 6R0 907 379 CB, HW- 6R0 907 379 AS here are some details of my car - vehicle VIN last 5 digits- 00633 - Engine code- ...

You just need a 4 digit pin code to activate the rns. Get it from the seller you bought the rns from.


Sent from my iPhone using Tapatalk

What if the 2 grounds are connected together (share the same ground point), blue and white goes to mfsw controller pin 4, will the horn work?


Sent from my iPhone using Tapatalk

Brand new vento motorised folding mirrors for sale. (8 pins)
LHD version
Brand new
White painted covers
250USD

ciclo wrote:Beetle Bluemotion.

2013?

Alvin1001 wrote: ↑Sat Jul 28, 2018 11:50 am Looks like I'll have to find a door module thats for polo or vento

Read govindsharma thread.

It's a 2012 beetle 2.0 with standard folding mirrors
Sure. Will do
Thanks Ciclo


Sent from my iPhone using Tapatalk

*Update* Took the door module from a beetle, plugged into my car, mirror folds without any additional coding. But the window does not roll all the way up as beetle has a frameless door. Looks like I'll have to find a door module thats for polo or vento https://uploads.tapatalk-cdn.com/20180728/d6f47...

ciclo wrote:

I'm afraid your WRMs don't support the mirror fold function.

Read the govindsharma's topic.

----
edit
4R3 comfort function .... for windows.

I see. So which version of regulator should I get? Any specific PR codes?


Sent from my iPhone using Tapatalk

It's highly likely that the software (SW 5xxx or 5540) of your window regulator motor - door module - doesn't support the folding mirror function. What's the model year of your Vento? (letter, tenth digit of the VIN) Hi Ciclo, the 10th digit of my car is F. My car is manufactured in 2015 Sent from ...

Hi guys, I own a Vento that does not come standard with side folding mirrors . Thinking of retrofitting into my car, has anybody done it before? I have bought the new mirror with folding (8 pins) and the new folding switch . My door module part number is 6R0 959 802 AL ( driver side), 6R0 959 801 AH...

Installed a new park pilot parking module. Parking sensors will automatically switch on when close to an obstacle. However I'm having some unknown errors when scanned with vcds. Has anybody installed this type of parking module before? https://uploads.tapatalk-cdn.com/20180724/7c2a38d19d8d755d5998c3...

Thank you iichel. Managed to get it to work.

Hi guys, I have a polo 6R that doesn't come with illumination dimmer switch. (Only headlight levelling adjustment). Bought a new switch with illumination and headlight levelling and added a new wire at pin3/t6 at the dimmer switch. But I'm clueless where the other end of the wire goes to. My Bcm is ...

Thanks so much for your reply. Which pin on the BCM do I need to locate and where is the BCM in a RHD car? So the loose wire is for the red back lighting? The ring is for ground? And which location in the fuse box do I connect the larger pin? Do I need an additional fuse? The bcm for rhd is located...