UK-POLOS.NET - THE VW Polo Forum

Justly, I don't understand what does the error code mean.

P0140 00 [237]

Hi guys, I have a Polo 6C 2015, Engine: 1.6 MPI (CWVB). 108000km rolled.
Engine scan found this:
download/file.php?id=4794&t=1
download/file.php?id=4795&t=1
download/file.php?id=4796&t=1

What should I do please?

Hi guys, I have a Polo 2015, Engine: 1.6 MPI (CWVB). 108000km rolled.
Engine scan found this: should I replace the lambda probe n°2? Or what should I just do please?

Lktuning wrote: Wed Mar 27, 2019 7:03 am Do you have all sensors in your car?

Front
6 x sensors

Rear
6 x sensors

Not work this system:

Front
4 x sensors

Rear
4x sensors

I have Front: 4xsensors and Rear: 4xsensors.

" 03 ABS pump - 24 sections --- changed to 20 / wheel sensor Byte 26---Change F0 "
Hi these settings are not for your polo abs because the abs coding is only 25 byte long ... must be for golf abs..

As the seller talks about ABS coding; I think it is included in the coding of the PDC system.
I ...

The question is: 5QD919294G unit, is it compatible really with polo 6c or not? And what coding is needed?

LKtuning:
I don't need to 2.0 PLK upgrade, this is for 12k OPS (park assist).
In my case (8k ops), Normally I wouldn't replace ABS sensors.

massimo23 wrote: Tue Mar 26, 2019 10:50 pm Well according to what he said you would need to change byte 24 in abs long coding from value 80 to F0 for wheel sensor. I cant understand the section 24 part?

massimo23:
Have you labels of each one of bits [03] unit?

I am waiting for his answer

His Unit is 5QA-919-294 with software 5QD 919 294 G (these for Chinese market?)--- Park/Steer Assist

I wonder if this module is compatible with the polo system?


Yes; it's Chinese module. and seller told me that it is compatible with polo 6c :roll:

Today I sent him a message; he answered me ...

massimo23 wrote: Tue Mar 26, 2019 2:10 pm Also have you coded the pdc in the engine module: Byte 03 Bit 04 to enabled?

yes I have already tried that; but nothing happened! and I checked same Engine coding for another polo Carat plus 2016 (highline); it is: 01110012022400000000

I tried to change [10] park assist unit coding to: 00 1 1151001 (byte 01/ bit of Vehicle path display: with vehicle path display is disabled )
at this time; codage is accepted then I deleted all error codes; but I was surprised by the inactivation of all the park assist system (even front sensors ...

Hi massimo23:
about my coding/adaptions for steering assistance:
- long coding is: 0007
- adapataion "Characteristic curve of steering assistance: Driving profile selection button" is unknown (photo)
IMG_20190326_124645[1].jpg

and the rest of adaptions is:
SW:6C1-909-144-M HW:6C1-909-144-D ...

1- Yes I will try secured access to [10]unit.
2- How about (Vehicle_configuration) adaptations in [5F] unit:
OPS_display_in_dash_board_display_unit: Off
Pilot_Parking: Not activated.

Its not found in my adaptations, can it be due to a lack of long coding in [5F] unit?
And subsequently, the error of ...

I checked what you mentioned massimo23, and I found this:

1- I didn't found this adaptations in [5F] unit: (In Vehicle_configuration)
OPS_display_in_dash_board_display_unit: Off
Pilot_Parking: Not activated.
IMG_20190326_014726.jpg

2- PDC_audio_lowering_msg_bus, I didn't found suspension data ...