UK-POLOS.NET - THE VW Polo Forum

Does the central locking work from the button inside the car ?

Try a new switch, pretty sure that will sort it.

Try 'euro car parts .co.uk ' a good source of non genuine car parts here in the UK

That would depend on what type on service plan you purchased, 1 - Was this plan through the manufacturer VW ? In which case you should have no problem going to ANY VW dealership . 2 - Was this plan something the suppling dealership did for their own customers to retain them in aftersales ? You will ...

Cameras had a film in NO WAY , next you will be telling me you had to wait 3 weeks to see the pictures

As previous reply you can adjust the head lamps up/down left/right but both low and high lamps adjust together in that lamp ,so you set the low beams correctly then the high beams should be fine, that said check the high beam bulb fitment as this can affect the beam patterns if not fitted correctly....

The head was damaged as you can see in the photos, so scrap. The bores also damaged from bits of valves smashing around in there,so scrap.
we fitted a reconditioned engine to this vehicle.

Same engine , totally destroyed this when the belt snapped

When you say ' Weve fitted a new stubby aerial, did not improve, removed the HU and checked all connections, all ok.' do you mean the Ariel mast (screw on piece) or the complete unit on the roof ? If this were mine i would replace the aerial base unit first job and check for corrosion on the cable t...

Hi, are you able to post some pictures of the OEM unit so people can see what you have currently ?
Would you be fitting this yourself ?
Are you confident with wiring ?
Why not list a ‘must have’for the new unit ?

A basic obd reader will ONLY read the engine ecu

I guess you might need to check the belt timing or/and that the vvt is working correctly

There are two bulbs in each rear lamp for side lights each side

Check you have the correct bulbs in the rear light cluster ,The top bulb is a stop/tail light 21w/5w(double pins), the bottom bulb is a sidelight only 5w (single pin).

Do you know the engine code ?

These generic ‘P’ codes usually have 4 digits and a brief explanation. Please recheck the DTC’s with your OBD scan tool ,After a quick google I found this What the P0011 code means. P0011 is the OBD-II generic code indicating the engine control module (ECM) has determined that the bank 1 intake cams...