UK-POLOS.NET - THE VW Polo Forum

hello ciclo , the problem is that I had them in fact the mqs had unhooked, the problem was at the beginning of the connector, thanks for the code

hi guys, at the end I checked the connector of the ECU, check the cable of the cruise and actually the mqs is not stuck. pull the cable to let out the mqs, salt to 3/4 of the race coming out halfway from the outside, I try to get it out pulling it with a pliers but .... the mqs breaks in two parts !...

hello ciclo, as always thanks for the answer, yes otherwise did not even remove the protection of plastic pins, probably the mqs did not go to the end of the race and does not make contact with the ecu, the mqs was inserted in the right direction otherwise it would not have entered (I tried for safe...

hi ciclo, thanks for your help, I disassembled everything to see if there was oxide or otherwise, instead it was the mqs not inserted correctly in T41 (blue-green cable), now the on-board computer works perfectly, now arises a another problem, the cruise control does not go, doing the test in advanc...

Hi ciclo , thank you for reply, I read the pages, I confirm that the wiring was done as your guides, the scan I keep it, my ecu is: SW: 03L 906 023 E HW: 03L 906 023 D 1.6L R4 CR TD H13 8830 as I wrote again I have to unmount the ecu and connect the pin number 64 to t94 connector , I wanted to be su...

hello guys, yesterday I installed the wiring, except the pin that goes to the ecu for reasons of time and because the mqs should be slightly different, the onboard computer works but except the bottom button of the trip (sw instrument too old?) , the cruise keys tested with the vcds and respond perf...

hi guys, I have a 1.6 tdi 75cv polo shirt of 2010, the car has neither the automatic speed control nor the on-board computer, the instrument panel is this: (internet photo) https://i.ytimg.com/vi/2iHy15nouFI/maxresdefault.jpg waiting to change the dashboard with one of the seat toledo (that's a mfa ...

thanks buddy, it worked perfectly for both keys, I have no idea how he made all these problems the old cable, thanks again.

good evening, I tell you my misadventure these days, using a vcds cable of bad quality and reprogramming the bcm, always gave me coding accepted but the code did not change, suddenly shows a completely different code from my original (fortunately saved thanks previous scans), so the 4 electric glass...