UK-POLOS.NET - THE VW Polo Forum

Thank you for the reply :D
I don't know if I've found a true solution but in my case it worked and now I want to share the "solution".

In VCDS -> Select Control Module -> 09-Cent. Elect. -> Coding - 07 -> Long Coding Helper -> Byte 14 -> Bit 2: Service Position for Front Wiper active

Basically ...

Hi to all.
Probably it's my fault and you'll know what is happened before.
My Polo is a bluemotion year 2010 and I wanted to bypass the electronic of my BCM to have the Coming and Leaving home function like an OEM style.
A few years ago I purchased a bluetooth light switch with automatic function ...

Sorry for the late reply, but you were right!
Thank you so much

Hi to all!!
Like every august my car give me some problem :( (maybe my car don't like too hot temperature).

The problem looks like this:
when I am accelerating, the engine speed rises as if I keep the clutch pressed, then when I release the accelerator pedal they "go back" to the right value.

I ...

Perfect, thanks for the replies :)
In fact my door lock last 13 year :shock: like the age of the car that was born in 2010 :wink:; while if memory serves me I bought the car 7/8 years ago.

Anyway, thanks for the advice and I hope to solve it with another lock (hoping it's the right one :lol ...

Wow more than a story it seems like a real odyssey :(

Hmm... as the electric central locking is integrated in the door locks, it may be necessary to do a new synchronization with the key, that is, insert the ignition key/remote control into the lock cylinder, press the Unlock button on the ...

Hi,
it seems strange to me that it is encoded for 2 ports instead of 4 ports because that is perhaps the only bit that I have not touched...
Anyway I try to change it but, like you said, I don't think that's the problem

The original part number of my front left door lock is: 5K1837015B

The new ...

Hello everyone.
I have a problem with the left front lock on my Polo.
I start by saying that I bought 3 different ones and they give me the same defect...practically with the old original lock the car blocks regularly, while with the new one it doesn't want to block.
Here is a video to understand ...

In this case it's LED bulb, but with the incandescent bulb the result Is the same

Thanks for the reply but I think I'm bad explained.
This is a video for better understanding.
https://drive.google.com/file/d/1079LrAt4FMiTEcHHBNuSdrKiFD_niT-J/view?usp=sharing

Notice that when I start the car, there is a flickering light but only in that moment while new Polo AW or whatever new ...

Hi to all, I have a little question about the DRLs on my car.
My car is a 2010 6R Bluemotion with original P21w DRL in the fog lights.

There is a way to automatic switch off the DRL when start the car, and then switch on again?

Because the lights stay always on in 0 position, and when I start the ...

I can't answer because I personally replaced completely the shock absorber without unmount the wheel.
Anyway there are only 3 bolts for the shock absorber and they are tightened.
I would also add that I only hear these noises when I drive, but if I shake the car from a standstill, nothing is heard.

Yes, I have personally checked and tightened them as much as possible.
I had also tried to distance the bolts with washers and I also tried to put in a sponge to cushion the blows but the noise does the same, for this reason I exclude that the shock absorbers are the problem.

Hi to all!!
In my car when I drive, I can ear some noises from rear side of the car but still can't find what's those noises!
I've already replace right and left shock absorber with new one, and the top of the mount of these, but nothing changed.
I've looked under the car but can't find nothing what ...

iichel wrote: Thu Apr 02, 2020 2:32 pm For CH/LH with low beam you need to have the rain/light sensor and wiring for OEM auto lights.

This mean that without rain/light sensor I can't do nothing right?