UK-POLOS.NET - THE VW Polo Forum

288 -> 312 no problem 256 -> 288 you need to change hubs 256 -> 312 you need to change hubs 288 and 312mm hubs are the same I’ve buyed the 310mm brake caliper of gti 6c and original are marked to use with the 310mm disc. But zimmerman don’t produce sport disc for the 310mm. I’ve buyed the disc from...

For non gti model for bigger brake setup (288) I would have to upgrade to new hubs ? and ofc. caliper carriers discs, pads, and caliper? If you have the 256mm and want to put 288 and 310 you must replace the hubs. If you have the 288 you can install the 310mm brake with only replace disc and calipers

Here the photo of light switch

https://ibb.co/PNQKTN1
https://ibb.co/VjRsfVp
https://ibb.co/vsnvcGJ
https://ibb.co/njGvBKS

Here the Autoscan Wednesday,15,April,2020,18:35:01:50743 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 20.4.0.1 (x64) HEX-NET CB: 0.4508.4 Data version: 20200331 DS317.0 www.Ross-Tech.com VIN: WVWZZZ6RZBU054344 License Plate: Mileage: 95560km-59378mi Repair Order: --...

Hi guys. I’ve read few discussion of same job here on forum, but i want to retrofit only the bcm and for the moment i don’t need the automatic light module. Is this possible to do? Someone can help and assist me in this job? I can pay without problem.
Thanks guys

Have u tryed to measure the impedance of the line of the crash sensor from the ecu to the sensor?

Delete dtc with vcds and warning gone for sure...

I don’t think you can install. If i remember good the mechanical coupling from your gearbox and the one you want to install is different. So no way for retrofit

What type of glue did you use for close the ecu after repair?

Depend for work where? On ebay you can find many lamp with magnet and if you need to work on engine bay you can attach where you want

For service refil you need 4.5lt so buy 5liter.

I use pakelo 5w40. Much more better than castrol ori s**t

I need the same wiring loom. Can you contact me in pvt?

Hi, this emulator can work with golf 7 whell installed with 090 bcm? Let me know in pvt thanks.

Hi Guys. I write from italy. I’m serching someone can help me to install the 7E0937090C bcm and the 6C led headlight in my polo 6R. I offer to pay offcourse the service. If someone can do it, can write me in PVT his contact.
Many thanks guys