UK-POLOS.NET - THE VW Polo Forum

Hello everybody Polo 6n3 2005 1.4 TDI One of my suspension bushes started clonking back in the autumn, now another 2 have joined in so it's time to bite the bullet and replace all of them. Research tells me that it's not a technically complicated job (gonna make up my own puller), but I am pretty mu...

Yeah I usually try and get to 150k, I aim to buy at around the 70k mark so can get around 7 year's motoring for a meagre initial outlay. This car had spent the majority of it's first 70,000 miles in London so lots of 'bad' miles done in that time which I feel has led it to be a bit of a problem chil...

'fraid not! It's time to give up on this one I think. I now have a continuous misfire that is unrelated to the injector problem. On the basis the car is pretty beat up, needs a new windscreen and the MOT runs out next month it's off to the scrappie's for this one. Thanks for your help. I'm usually t...

Rain stopped play I have ordered a proper probe to make testing a little easier...... round 2 this coming weekend!!

That's all really really helpful many thanks!

I'll prod further with the wiring and report back after the weekend.....

That's really helpful, many thanks carrera!

Like I said, electrics are not my strong point... up until now I've stuck a probe
into the injector connector and then the other end into the wire that goes
into the ECU and got good continuity on each one... anything else I should be doing?

Cheers again!

Can't remember the P codes unfortunately but the ex VW mechanic who ran his computer on the car was equally flummoxed after a few days of fiddling! Haven't tried running it on 3 and reconnecting it, but after ticking over for a long while at traffic lights I then usually pull away on 3 cylinders, if...

Thanks for chipping in 937carrera Code reader said misfire on cylinder 03. Haven't got the readings to hand this evening.... no leak test done. No coolant being used. Injector diagnosed by using a long screwdriver as a stethoscope and holding it against each injector in turn (and holding the handle ...

Hello all, my first post here... thanks in advance for any help! 6N2, 1.4 petrol, 5 door... has served me well but may be heading for the scrap yard if I can't sort this one out. Rather than embark on an essay I'll list relevant info relating to the problem I've been chasing for the best part of 9 m...