UK-POLOS.NET - THE VW Polo Forum

It's with a heavy heart that I am looking to sell my Polo. I am moving to a far away land and can not (according to the wife) take it with me. I am just putting the feelers out as I'm not really sure on how much I should put it up for.

Details as follows

2005
136000ish miles
Polo GT TDI 1.9 130pd ...

Sorry for the delay in replying. We finally found the issue when we found the REAL location for the cambus wire from the fuse box. A little current check and hey presto, fault found.






SUCCESS

Finally got the correct wiring diagram for the car and found the culprit of ALL the issues.

It was ...

Sorry for the delay in replying. We finally found the issue when we found the REAL location for the cambus wire from the fuse box. A little current check and hey presto, fault found.






SUCCESS

Finally got the correct wiring diagram for the car and found the culprit of ALL the issues.

It was ...

SUCCESS

Finally got the correct wiring diagram for the car and found the culprit of ALL the issues.

It was a single wire between the fuse box on top of the battery and the Cambus. 30p worth or wire and tape and ALL the faults disappeared.

The Polo is now officially back on the road after 5 ...

Never got to the bottom of the problem with gremlins. I'm putting it in for investigation once I get other more pressing problems sorted. I expect it will be explainable (damaged wire or something like that).


Did you get this all sorted in the end?

I've had to have time away from it and have ...

So the lights are still there after a full wire check, the abs light, the brake wear sensor light, power steering light and the red flashing handbrake indicator light after 3 beeps. I'm at a loss of what to do next.

What did your gremlins stem from?

Thanks


You've checked the wiring under the ...

I've removed the stereo as it was an after market one. Checked all fuses and earth points, I've tried 4 different abs modules and 2 different abs pumps. The front brakes were replaced as were the rears. The brake wear sensor keeps beeping which is odd as they are new. The brake fluid level is topped ...

So, all wires seem fine, power is getting to the module. What am I doing wrong/ what else could it be?

Yeah. There is power getting to the controller but just doesn't want to be found by the VAGCOM. Going to get the wiring diagram for the ECU to the ABS controller and check those tomoro. Just need to find the diagram lol

Hi, yeah all fuses have been tested. The VAGCOM is working correctly as it's from the mechanics at work. The wiring was the next step but I'm conscious of how much of a pain it might be. I didnt know if anyone else has had the same problem that had an obscure remedy. Thanks

So, I've got a 05 plate Gt TDI 130pd and my ABS light is on with the 3 beeps. I've connected a VAGCOM I got from work and there says there is no connection to ABS controller. I've replaced the controller 3 times and also replaced the module and pump but still nothing. All fuses have been checked. I ...