UK-POLOS.NET - THE VW Polo Forum

You could consider extracting the camera lens module out if the whole assembly and extending the ribbon tape.

Example below.
https://mqb.pl/en/tutorial-retrofiting- ... 5q0980653/

What brand is your ELV?
What car does it come from?

Have you jacked up all wheels simultaneously at that stage?

Bravo Abdullah

Have you also connected positive supply to "15" and "S" pins?

Not yet Abdullah.
Yes stick to VW Kessy otherwise it will not work.
I think I am doing too many retrofits simultaneously .
The biggest slow down for Kessy on a Transporter is door handles grafting.

Cool project.
I was always convinced that ELV checks the brand with the ECU(pretty sure yours is VW) so curious how SEAT KESSY is going to work with yours.

311mm or 272mm discs?

@Shadow109 did you try your new TPMS unit on your existing H80 BCM?
I would expect it to work even though 65 is not present on CAN Gateway INSTALLATION LIST.

By the way you can get second hand 7E0937090 Max BCMs from Poland for approximately €60

No question Dennis I will definitely follow you with this retrofit.

Franciswat wrote:Hi Patil, thanks for the info.

Have you installed a CM/DM?

This is my radio startup!

https://youtu.be/yjb7JuEbwo8

Today a package arrived!

May I ask why 7E0 radars and not 5Q0?

Wysłane z mojego SM-G973F przy użyciu Tapatalka

All VW coolant temperature sensor and IC coolant temperature gauges have linear correlation from the bottom of the scale up to the point before reaching normal temperature (90°C). Basically IC gauge will show precise temperature from the lowest values up to approximately 85°C.
From 85°C up to ...

I would try https://www.traynors.co.uk/ up north.

There is no easy way to permanently convert lamps from LHD to RHD. And definitely not by adjusting beam pattern with these white screws.
I would simply buy a pair of lamps from local market(IRL, UK).
Maybe even preowned are worth considering?

Wysłane z mojego SM-G973F przy użyciu Tapatalka

If there is still anybody monitoring this thread, I need to find a way to code the DRL’s to dim whilst the sidelights and headlights are on. I have wired them up to the specified schematics on this thread, and work correctly apart from dim.

Any help will be appreciated! 09 BCM
Byte 23 bit 5 when ...