UK-POLOS.NET - THE VW Polo Forum

Hi, I want to correct my speedo to avoid any tickets, currently im running 205/40/17 tire size I saw there were some coding options for this in cluster ( named like for fabia and etc.) Does someone know how to calculate this and what is the closer option for 205/40/17 tire? Sent from my Nokia 6.1 Pl...

If its bonded with double sided tape, use sewing string or dental string just double it, and use it like a hand saw to cut thru the double sided tape.



Sent from my Nokia 6.1 Plus using Tapatalk

Wern't there some sticker that you could put on you headlights? Im pretty sure that many people that come from UK to visit Germany etc. Put these on.

Sent from my Nokia 6.1 Plus using Tapatalk

Digital speedo reading? You get it but it isnt that big. ( Its the same height as fuel economy)
Maybe it could be scaled via adaptations? Im not sure, but i still didnt got the coolant temp reading, and i cant find it in adaptation channnel

Sent from my Nokia 6.1 Plus using Tapatalk

Get it on the motorway, and drive it on higher rpm

seat ibiza 2009- 2014
audi a1 2009- 2014
they should fit 100%

Im thinking of swaping in the seats from vw passat b6 highline. They have bolsters almost like mk5 gti. But i think sliders need fiddling. I love the seats in scirocco

Pocket rockets!

Sent from my Nokia 6.1 Plus using Tapatalk

i think this drop looks perfect and aggressive. I used Eibach and H&R, with H&R the car was very short and nice but it bounced all the time my car is a 6R Blue GT. After a week of use, Mount Eibach again as the car worked really badly. I bought H&R 35 / 55mm. I sincerely recommend eibach...

For non gti model for bigger brake setup (288) I would have to upgrade to new hubs? and ofc. caliper carriers discs, pads, and caliper?

Ok let me start. What you need is a button ( you can go with 1 button, two or three). One for next, one for back and one for ok If you want 3 buttons you will need 4 wires. https://uploads.tapatalk-cdn.com/20200415/a7efe8fc752d8c34f3dc06967e9b9924.jpg To one pole of a button goes ground wire, and to...

iichel wrote: ↑Tue Apr 14, 2020 5:25 pm 21 up
22 down
23 ok

You can make a contact to gnd to send the signal.

It's a very simple system, easy to emulate with non OEM buttons

yeah that confirms my thoughts, just now to find 000 979 009 pin terminals in this lockdown

Well it seems in this diagram http://i38.servimg.com/u/f38/18/94/39/39/6r1-0610.png (cluster connector) pin T32/16 is ground, and on stalk switch - T41/19 is also ground - Grounding the switch. I think it should work, but I'm not sure where to connect the button to pin 22, 21, or 23 :?: Basically if...

Stalks not worth of upgrade for my car

Sent from my Nokia 6.1 Plus using Tapatalk

At bottom of the page tutorial I've been re-searching a bit for MFD options, i know that it can be coded out with VCDS, that's not the problem, problem is the button/switch on stalks. But digging a a bit on the forum i have found this. https://www.aliexpress.com/item/32577003507.html Witch is basica...

I have these ones:
https://s.click.aliexpress.com/e/_d7nRrsU
They dont retun a fault. You can also get them in other colors.


Sent from my Nokia 6.1 Plus using Tapatalk