UK-POLOS.NET - THE VW Polo Forum

pic on left happens when you lower the car
That car was probably a stance car before you bought it.

The speed in these sections is 40-60kmph, so I was under the impression it is reasonable. Of course on regular 4+ lane highways it is not useful. Thanks for the pointers. There is a huge flood of cheap leds in the markets, and since MOT tests don’t happen here, people use them without consequence. ...

I wont be pulling it to check, people didnt report any failures, just noise and that clunk...

i'm staring to think that the play/ twitching is coming from clutch plate heart play How so? Then again, the 6-speed in my car does have a "loose" feel to it compared to something like the old 020 in my mk1. I have heard feedback from people with 1.4 tsi, that there is this kind of issue....

check the ball joint for play, and rear wishbone bushing

i'm staring to think that the play/ twitching is coming from clutch plate heart play

you dont really need to powerful foglight in the begging. They will just do the opossite and blind you in high fog.

Thanks Amer6R. I am going to have a go at replacing just the Gaiter with a leather one but just in case it goes wrong I'd be grateful if you could let me have to details of the aftermarket one pictured - due you have a link. Cheers Its golf 7 gtd shift knob. But I'd recommend sticking to 6R or 6C b...

How do I do that, I have OBD11? maybe check under bcm-> output tests I’ve done that, however it says function cannot be performed, mess length or format incorrect. Although it says active when running the cycle. do you have option for live data You go into live data and find the value for wiping. T...

spotter_sam wrote: ↑Fri Feb 16, 2024 1:54 pm

amer6R wrote: ↑Fri Feb 16, 2024 1:51 pm can you initiate front wiping function via diagnostic tool?

If you are going to but the motor separately, not that there is a specific position it has to be in when bolting the linkage

How do I do that, I have OBD11?

maybe check under bcm-> output tests

can you initiate front wiping function via diagnostic tool?

If you are going to but the motor separately, not that there is a specific position it has to be in when bolting the linkage

https://i5.walmartimages.com/asr/5467d255-c4dd-453f-9c9c-b216c3d96cbe.2fd93bef1f5a69d57c052a61a5692b87.jpeg?odnHeight=768&odnWidth=768&odnBg=FFFFFF I have that type of knob, its leather ( its not original) and the car is parked outside and 0 issues for few years now. I'd rather buy a replac...

Hi Amer, Thanks for your reply. Can You share abs coding for the unit. Also the vehicle has only one Exhaust gas temperature sensor. What to do to disable the egt sensor errors.? remove dtc Maybe you forgot to plug it in? you have one sensor on the turbo housing, and another on top of dpf filter.

for dpf and egr you will have to flash maps in ecu( visit your local tuner)

The ring that holds the gaiter on mine knob didnt crack. And i think you will get a new on with a new shift knob.
In worse case you can use a zip tie, like on jdm cars...