UK-POLOS.NET - THE VW Polo Forum

Hi Ciclo, I have put this coding into BCM just now, many thanks for this, it is like a different van :D Fault scan below Current state of affairs- Relay fitted, which is supposed to be a direct replacement for genuine VW 646 relay - Bosch 0332201107 - which I think is an 30/10 Amp, this is all I cou...

OK, so I have done the majority of the wiring, and enabled xenon lights in BCM. Still waiting on 646 relay for auto lights so this is currently missing. Also no RLS or ALWR plugged in. Only Right hand headlamp wired in so far, The left will be fitted when I refit the bumper. At the moment I have no ...

Ok So got a little bit more done today, Ran a new 6mm cable to rear of bcm area for extra +30 supply if needed. Removed Battery Regulator from Installation list. VIN: WV2ZZZ7HZDH0 License Plate: BATREG 61 REMOVED Mileage: 130870km-81318mi Repair Order: -----------------------------------------------...

Again, 1000 thankyous Ciclo, :D New extraction tools should be here tomorrow. (same as you recommended) Do you know the wire sizes mm2 on those repair wires? 219E 236E I am going to visit the car breakers yard this week and see if I can get some parts and will have a look for a couple of those relay...

Hi folks, hope you have had a good weekend. Many thanks for the above information and guidance, I will get more bcm coding done once it is safe enough to reconnect the battery. I will order the correct windscreen mount and mirror parts and get all the parts ready for a proper install. Today's progre...

Many thanks for your help Ciclo, I see now what you mean about the mirror. I think when it comes to the auto lights, I will just run all the wiring ready to plug in at a later date. Would this be possible? I might change the windscreen for a heated T6 screen with correct sensors at a later date but ...

Fuse box A in ebox New feed for +30 6mm wire fused 30amp IMG_0566.JPEG Ran up original loom and fed through this grommet IMG_0581.JPEG Fuse box SB IMG_0607.JPEG Fuse box SC IMG_0544.JPEG Kufatec loom for ALWR that will be modified to pick up left headlight at T10/T14 and shortened in places. (i thin...

(first time posting photos on here) I have another post with vcds scans which is currently pending approval.

Headlamp switch plug T17
BCM 's

Hope this works...Before I get to stuck into this and cant connect the battery. Plenty faults :D Some things not plugged in, I have not had much of a play with the 090 bcm yet. BCM 087H Friday,31,July,2020,11:56:28:03258 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: ...

Thank you so much for your offer of help @ciclo, it is much appreciated. Once I get the photo situation sorted I can put up the pics of my current fuse box, etc. I have VCDS so I can post up scans etc. Although the first scan may be an old one but still relevant. I can put up the full information of...

I have to recommend this website for plug/socket terminals and connectors, https://www.automotive-connectors.com/ It is easy to search for different sizes types etc. For example, I struggled to find somewhere that differentiated between sealed and unsealed terminals and I struggled to find a site th...

Finally getting stuck into this........ I have most of the front end off for an EGR cooler and thermostat replacement, Not a nice job! Smoothed out a bit with the fitting a Wagner Intercooler though :D I am deviating from the "plug and play" looms slightly, I am trying to replicate the ori...

If it helps the left headlight is part of the bumper loom, when I retrofitted xenon headlights I replaced the bumper loom (I was also adding from PDC which is part of that loom) then you will only need to run the extra wires to the coupling point behind the right headlight and also gives you a new ...

Sounds exciting! Would get yourself a copy of ELSA and ETKA to have a look through all the OEM wiring diagrams so you know what connects where to get it to factory then you can put in the mods from this thread! Hi Bizmo, Thanks for your reply, Funnily enough I downloaded loads of ERWIN information ...

Hello everyone, I came across this very informative thread after researching the fitting of xenons to a T5. I used to own a 1985 vw polo saloon (which was probably the best car I had owned) I did have an account on uk polos but cant seem to remember my old details so have created this new one. I hop...