UK-POLOS.NET - THE VW Polo Forum

Very impressive, I ordered a repair kit on ebay, do you have tvs software on your?

i don't know if this is different but looking at the wiring diagrams i have for my 6c GTI i downloaded for erwin

it shows that the dsg controller has a 25 pin plug rather than a 20 pin (this could be wrong as mine is a manual car)


Hows the noise with the single mass you are running? I ...

Just about. Flywheel is done.


Did you do software on the tcu? My goal is to reach around 400nm safely, the dq250 should be able to hold that without issues. Another option I looked at is the TMG Performance Kevlar Clutches and TVS Stage 1 software, however with the software they raise the fluid ...

iichel wrote: Fri Sep 09, 2022 8:47 pm Yes, he is looking at the 6 speed wet-clutch DSG DQ250 rather than our 7 speed dry clutch DQ200.

iichel hows your dq200 holding on that amount of torque you produce? Any upgrades or replacements on the dq200 yet?

T20e/17 would be Terminal 15 if im correct according to the BCM

T20e/7 is connected via T14/13 to T105/8, like I wrote here:
https://uk-polos.net/viewtopic.php?p=592997#p592997

Powertrain canbus is not taken from the OBD2 plug but best taken from the orange/brown and orange/black canbus wires at your ECU.

Positives are divided into permanent positives ...

Do I need T20e/7 (speed signal)?

This what I have so far

john2k wrote: Thu Sep 08, 2022 7:20 pm What's the max wheel size the 2012 polo can take without issues?

18" with 215/35 rubber

I will post more pics, and do a complete write up of the process. The car had issues with the injectors, mainly due to the high mileage (433000km without opening the tdi), so it was standing for a while and thats when I bit the bullet. I could just buy a 6C gti yes but then I had to fix the tdi ...

Hi iichel, thanks for your reply, the ecu of the G6 have T94/T60 plugs, the G7 and 6C gti have T105/T91, I checked the physical ecu just now the part number is 06K 907 425B, same between 6C Gti and Golf 7 Gti. Attached is the wiring diagram of the J623 module. When I go into the dual clutch ...

iichel your car is a dream, perfect example of how a Polo should be, I bet you enjoy that amount of torque very much. Well done sir

Hi iichel, thanks for your reply, the ecu of the G6 have T94/T60 plugs, the G7 and 6C gti have T105/T91, I checked the physical ecu just now the part number is 06K 907 425B, same between 6C Gti and Golf 7 Gti. Attached is the wiring diagram of the J623 module. When I go into the dual clutch section ...

I had a look at the G7 gti dq250 mqb gearbox wiring, theres wires going to the ecu but the no indication on pin assignment at the ecu plug, can anyone maybe help me figuring out where the wires go?

I had a look at the G7 gti dq250 mqb gearbox wiring, theres wires going to the ecu but the no indication on pin assignment at the ecu plug, can anyone maybe help me figuring out where the wires go?