UK-POLOS.NET - THE VW Polo Forum

Hi Ciclo, Flip flops are the best, slip ring could work out better, maybe next one will be better :) Few mods still to go Target is simple, Caravelle with top spec, only two bits missing now, genuine air suspension - like in California van and radar sensor Thank you guys for all help without you, it...

Hi Ciclo,
Thank you for a link with slip ring mod for heated steering wheel

I did one myself, maybe not as good as one from the link, but it does a job

Hi,
Thanks for reply
Nothing important then, don’t have to be connected
However it can be a handy retrofit for cold days

Unfortunately there are no empty pins in a stalk tape to make it work and I don’t think there is a way to use Touareg or Golf tape to get extra 2 pins

Hi,
Anyone have an idea what that yellow and brown wires with 2 pin connector are for?

My mistake, I switched on bit 2 instead of 3

Everything works now

Hi Ciclo, High beam is working fine after all, it was wrong coding It is my original coding: A0B2F93A4E61241393288E716E2B8EF54280662F6085784032000302 0400 It is a new coding that I took from my mate who has T6 wit factory fitted return spring stalk B8AC39B86A61341293284F207E8B9F50C094738960CD79F0320...

Ok, so thats the way how it works even if HBA is not activated yet ( channel 53 is still on 0 ) This is not a big issue, if its the way how I need to switch them off, at least they work :) I wondering why flasher is not working, if I put 12v on T41/39 ( goes to T73b/8 ) nothing happens, from what I ...

Hi Ciclo,
I did installed 7E0...90 BCM, I have 2 and both of them getting same problem

On 7E0 there is no need to change PWM, like with 7H

On 7H0...90 BCM you can not change byte 28 bit 3 to 1

Hi Ciclo, Hello again after long break, after holidays I went straight to hospital for 2 week ( not COVID-19 :) ) I can confirm there is no HBA function available ( in Gateway installation list ) for BCM 7H...090 - at least in 5 that I have from years 2011 to 2014 I still have a problem with return ...

Hi,
I meant if 7H0.. 90D BCM will work or it must be 7E ... BCM

Hi Ciclo, For 7E0 stalk and HBA Do I need 7E0...90 ? Or 7H0...90 will do the job as well ? Everything is pre wired and ready for HBA once mirror with camera arrive like on diagram you send me, just different fuses SB18 and SB22 for HBA feed, SB6 and SB28 for high beam Footwell lights work great !!! ...

Hi Dazzyboy,

If you not far away from Leicester I can help you out

Hi Ciclo, Sorry to bother you again I am about to finish off my van, however I still dont have HBA mirror, so I want to leave all wires ready For instalation without HBA autolights relay is triggered by T73a/1, should that wire stay there and be connected with wire that comes from fuse box for HBA o...

Hi,
Can you send me a link, paypal user, whatever to buy one of this emulators , please

Hi,
Is anybody here who can speak Russian ?
I need some help buying cruise control adapter from this website
https://www.drive2.ru/l/546511156148177688/

Thanks
Lucas