UK-POLOS.NET - THE VW Polo Forum

Was watching your YouTube videos, loved your Polo 8) Do you have any dedicated post on ambient light installation? Thank you for appreciating my little 6R🙏 ... my 6R is my meditation.🤘 Here are the relevant links to my ambient light project. I regret that I didn't pen down the full wiring details i...

Also do you have any idea if can we install the tweeters from Tata Nexon in our VW Polo/Vento? I recommend to install OEM A-pillar trim with tweeters in built. RHD: Driver side A-pillar trim with tweeter-- 6C6867234 Passenger side A-pillar trim with tweeter-- 6C6867233 Tweeters only-- 6C0035411 OEM...

Where can I source the clips from? I believe the service centre won't sell it over the counter. You can buy clips from below Indian website. Longer clip 7L0 868 243 https://boodmo.com/catalog/part-clip-4960042/ Shorter clip 6Q0 868 243 https://boodmo.com/catalog/part-clip-4952877/ Thanks for the li...

Thanks, the door handle is properly locked but one or two door pad locks are damaged. Replace the door clips(locks) accordingly, to prevent any rattling/play. If I remember correctly, there are 2 types of clips used, one shorter and 4 longer per door pad. Would you mind sharing what kind of work/ r...

Hi guys, I removed the interior door trim for some work which also made me remove the interior door handle, upon fixing back the interior door trim and door handle I have noticed that I have lost the typical VW Hard and solid feel which was there on the door handle while opening the door. My guess ...

Hi guys, I removed the interior door trim for some work which also made me remove the interior door handle, upon fixing back the interior door trim and door handle I have noticed that I have lost the typical VW Hard and solid feel which was there on the door handle while opening the door. My guess i...

Did anyone try this in Indian spec cars?

Hello Folks,
Where can I buy BCM MAX (for Vento, polo sedan POLO 6R) from in Germany?
I am from India and luckily one of my friend happens to be in Germany as of now so he can buy it for me
A little help would be much appriciated
Thanks

I see You can order these from your local VW dealer. You'll need details from ETKA to get the plug part numbers and associated pins however Ciclo on here may be able to assist you I tried to approach the VW dealer here in India but no luck, will try to contact Ciclo. Thanks for help :) Hi Karthik, ...

Hello folks, I have a VW Vento 1.6 mpi, I am facing a oil leak issue near the oil filter and timing cover seal, is this a common issue for 1.6 mpi engines? My Polo has a different 1.6 engine (EA211), so I am not sure if it is a common problem on your engine. But either way, it is better to change t...

Remove cluster from car. Open the cluster by removing torx screws. Turn needles in anti clock rotation while pulling up. Remove the tacho plate, on the PCB there is an EEprom chip. You will need SOIC clamp ( if you dont want to de solder the chip) If you are going to remove it with an iron USE FLUX...

Oil leak on VW Vento 1.6 mpi near the oil filter and timing cover, please help.

Hello folks,
I have a VW Vento 1.6 mpi, I am facing a oil leak issue near the oil filter and timing cover seal, is this a common issue for 1.6 mpi engines?

amer6R wrote: ↑Tue Sep 29, 2020 7:22 am Not possible, you will have to access the Eeprom and change change stored value.

Thank you for the reply, does accessing the Eeprom needs some kind of special tool?

iichel wrote: ↑Mon Sep 28, 2020 7:53 am Ok then it is going to be difficult :p

I will try to arrange for a VCDS cable from a friend btw thanks for the quick reply
below is the link of my post describing the error codes with my cable
viewtopic.php?f=56&t=70519&p=575973#p575973