UK-POLOS.NET - THE VW Polo Forum

thanks for the info ,was thinking because its 2002 at 40,000 miles

Hi all

my sons car is a 2002 polo9n 1.2 with 40,000 miles on the clock should the timing chain be done

jsut a thought

any ideas

we have a vw polo 2002 9n

what is the best engine oil to use 5w 40

or 5w 30
we are using 5w 30 at the moment

any help would be great

My Son polo 9n 2002 has failed the MOT for the engine management light being on

its due to the throttle body code ,does it need to be programmed by vag com when you fit the new throttle body

I have VCDS-Lite with lead and can read error codes but not sure if it can programme the new throttle body

Hi All

just replaced my sons 2002 front exhaust pipe and little bit of heat with heat gun you use for stripping paint

off the 3x nuts came ,21 years old and off the manifold nuts came

easiest exhaust I have ever done

would not happen like that in a modern car

Hi All

My son has a vw polo 2002 9n the exhaust flexi at the front as started to blow ,i,m thinking of fitting only the front flexi

does anyone know the inside diameter of the exhaust

Hi All

looking for throttle body gasket part number for the above

help needed

is the sticking brake not just that cant see a abs sensor having an effect on the brakes sticking
jack it up and strip the brakes down then go from there
good luck

Hi All for your information ,I just seen a you tube video on that error code and it pointed to one of the 3x fuses on top of the battery have history of hairline cracked cleaned them and when I tried to remove the 2nd one split in 2 Bingo made up temp fuse with some cabling and crimps until I get co...

Hi All

need some help my sons vw polo has came up with 01276 ABS Hydraulic Pump V 64 error 014 -Defective-Intermittent

is this the full ABS assy needing replaced

Hi John

cleaned throttle body with carb clean and fault came back after a few runs
same error code ,me maybe get a TB and try it before the winter

will keep you informed

Hi all

do you know the best place to but a new throttle body as it keeps bringing error code but no limp mode up

thanks for your info

Hi all

I was wrong code came back do you need to program a new throttle valve module

or can I just fit it

Hi All

I took some Carb cleaner to the idle valve and yes it was dirty ,

no code returned

Hi All

thanks to everyone that added comment but the garage cleared it when I went to pick the car up and did not charge me

maybe to do with my vag com lite

no lights on now also cleaned the butterfly flap on the throttle body and no error codes came back