UK-POLOS.NET - THE VW Polo Forum

Sorry for posting this so late as i am new member but what i discovered is that in india due to govt norms it is done and if you just change the region of cluster to japan everything is sorted

You have to add 3 wires 1 is gnd one is lin bus and 3rd is +vcc you can get ground from airbag loom and work your way with 2 wires through clock spring one to bcm and one +12v from headlight switch

Thanks for you assistance i finally installed it just needed 3 wires as you said and was super easy coded it using vcds and everything is working

1) It depends from your installation but sometimes the linbus wire is located in the door loom, so you could easily access it there. If you don't have the linbus wire there then you must get it from the BCM directly. Most likely there is no wire yet in pin T73b/17. You might even have to put in a d...

Hello guys this is sid from india and i own polo1.0tsi edition which was a special edition launched by vw here in india and i was lucky enough to get a climatronic ac but sadly no steering controls available on my model from factory and it came with basic airbag only without buttons from factory ! N...

They are good but only if you need looks they lack on performance oart and. Not mucb of throw on road but you can always swap Projectors in these loghts to get better view on road

iichel wrote: ↑Sun Mar 14, 2021 11:32 am No, it is very different and you need to make sure your BCM is part number 6C0 937 089 or higher.

So basically its same old polo and i have to add extra wires 12v and lin bus? Also is there any other way to tap lin bus except bcm pin 17?

Can anyone tell if mfsw installation procedure is same for 6r and 6c? I have a polo 6c comfortline tsi edition 1.0L with climate control ! Is it possible to add mfsw ?
Car did not come with any buttons from factory !