UK-POLOS.NET - THE VW Polo Forum

iichel wrote: ↑Sun Mar 17, 2024 7:49 pm 1 is Red 2 is brown. Its fine just like the scheme?

Yes that's right. But in the scheme the Red is for Plus (+), in my car it is connected to the minus (-) of the speaker.

Today i was try to change the front speakers. I was faced with a strange situation. The subject of the positive and negative pole of the speaker. In photo 1 is the electrical diagram, in the photo is the real situation. Photo 1 https://i.postimg.cc/j5cXQ0zw/front-right-door-speaker.jpg Photo 2 https...

If the wire is white with a red stripe then SC12



Is it is red with white stripe then SC15

Hello.
Fuse No23 (the fuse you have with the arrow) is resposible for the wipers.
Take a look at the photos.

take a look at this link:

viewtopic.php?t=78347&start=15

or just the photo:

Hello,
The A1 is an excellent car. I'm glad for you.
I hope you enjoy it and of course I already read that you have designed the first retrofits. Good luck with these and have fun.

Hello, again. I am thinking seriously to add footwell lights (front and rear). I am searching for the retrofit option and still gathering information. The Octavia is based on the MQB EVO platform (like Golf8). https://i.postimg.cc/zfFJtWKy/MQB-EVO.jpg So i need the hardware (wiring and lights) and t...

it's a really simple construction using vcds: ENG115729-ENG116609-Scheinwerferreinigung-Anzahl Betaetigungen Frontwaschanlage pro SRA Aktivierung,1 ,10 <-- set to 1 = every cycle ENG115729-ENG116610-Scheinwerferreinigung-SRA Verzoegerungszeit,1500 ms,10 <-- set to 1500ms for the long press duration...

On both the Polo and the Passat, I made a 'long press for SRA' construction. If the lever is pulled longer than about 1,5 seconds, the headlight washers go. Otherwise only the headlight washers. Slavik already offered to do the soldering, only thing needed now is the electrical components. It would...

As i mentioned i bought the plastic trim with the USBs holes. (5E3863618 (9B9) The USB module with 2 USBs - C ports is the 3G5035954A An cheap sourch is from a Poland site named SkodaParts   (https://www.skoda-parts.com/spare-part/3g5035954a-usb-c-connector-skoda-38659.html) I did the wiring. I boug...

Thank you all. It is clear that the module should work with the first two pins connected to +12V and GND but it doesn't. I even tried the way iichel did. So maybe it is a defective one. I will buy another one. Thanks OK, I bought a used unit from T-Roc and it works. Of course the plastic face is di...

update: I install the rear view camera. I bought another type of camera. I got one that mounts on the license plate light so I don't have to drill a hole in the bumper. https://i.postimg.cc/PNHLcTCn/20240210-161039.jpg https://i.postimg.cc/w7T1q25W/20240210-161048.jpg https://i.postimg.cc/PP3PPD2d/2...

The main unit if the Infotainment is in the glove compartment.
There you can find the Quadlock connector.

Take a look at that tread
viewtopic.php?t=62043

Ambient lights Project is over. It took many hours and a lot of effort. About 4 hours for each door. It was worth the effort, the result is perfect. I only hope that the Chinese materials will stand the test of time. https://i.postimg.cc/Hs8bkRqG/20240127-050226.jpg https://i.postimg.cc/FHt3dGvY/20...

One of the best upgrades anyone can do. And easy.
Well done!
Excellent packing