UK-POLOS.NET - THE VW Polo Forum

PandaGTTSI -- I had sourced it from Poland. Somehow I cant locate the seller anymore. You can check ebay if you can find exact part. Sometime ago, I had seen similar on Vagtune. GermanDNA are could be useful. As both of them seem to be interesting mods. You can check photos here : https://uk-polos....

Btw, due to climatronic and hba, i decided to get this RLHS instead of just circle RLS. with Manual HVAC before, i always turn on the Air Circulation and i never had freezing evaporator coil. but since Climatronic, i feel like it does better in Automode(leaving the Air Circulation off - most of the...

Hi Amir, big fan of all the lighting mods you've done! I plan to implement some of these myself: 1) Boot Open Lamps 2) Door Courtesy (Puddle) Lamps for only front doors since nobody sits at the rear in my car I hope you can share the 3D files so that I can get the parts printed. I also request your ...

Hi Patil, Yes, I don't plan to touch any of the BCM wires :lol: That would be a dangerous territory. My plan is to take the positive for both (Glove Box & boot) Lamps from the Dome light (T3/2) line you mentioned and ground separately. For Glove Box, I'll take any nearby point but for the Boot, ...

So all experienced and DIY enthusiast, could you please help me with following questions: 1) I have brought a 6C0419091H steering wheel with paddles shifts. So do i need any wiring to be done to activate it? 2) How can i connect the tweeters (6R6867233 and 6R6867234) to existing music system. Hi, c...

Hi @ag29 @patil Thank you so much for getting back to me so quickly! Just wanted to understand small points since I'm not very experienced. 1) For the light, I've already gotten the light assembly, the connector mentioned is to go into the light. For the other end where I take the power from, T73 me...

Hi, Do, I've been away for a bit. I managed to fix the OPS issue and everything works great. I'm planning the below mods soon: 1) MFSW with Paddle Shifters (I will keep the stock look) 2) Flip badge RVC since the one on the number plate is not usable during rains 3) Light in Boot 4) 12V socket in Bo...

There might be a channel for reverse display, and it can be OPS, camera or automatic. Can you please show what your radio displays, in reverse gear? Thank you, I will activate address 10 in the gateway and confirm. I have the RCD340 and display shown is the standard reverse camera interface. I don'...

Okay, thank you Iichel!
I'll first check the gateway and then re-check the adaptations. Al though, I think the adaptations were correct unless I've tried to activate something that can't be activated but then Coding would've not been accepted?

Thank you Iichel! I'll check the installation list again and check 10. Have a look at the adaptations for the ops module and coding for the radio. Unfortunately my VCDS cable broke :cry: and I have to visit a friend d to get changes done. Would you happen to have the correct coding that I can use? A...

I recently tried to enable 4k OPS on my car with stock sensors as VW had stopped supplying the OPS feature. I bought the module 6R0919475 from ebay and a CANBUS extension Harness. I added the CAN connection by: HIGH (T16/6 to T32/28) Orange Black LOW (T16/15 to T32/T29) Orange Brown The T16/6 was oc...

[/quote]

iichel wrote: ↑Mon Jul 26, 2021 9:16 pmWelcome

Thank you @iichel. I'm a big fan of your and @ciclo's work

Hello there!
I own a Polo GT TSI (6R IND) model which is run a little less since I have an office car as well.
I plan to add some convenience and comfort features to my car and am greatly inspired by the mods done by the forum members.
I look forward to all of yours' support in entrancing my Polo.

Any update?

My 6R IND came without a light sleeve for the 12V Lighter in the console. Will adding a light sleeve (1J0919341H) work? Also will the light behind it (Centre console light) light up?