Search found 4 matches
- Sat Feb 19, 2022 7:41 pm
- Forum: MK6 (9N) Polo - Years 2002-2005
- Topic: Can't get the timing right
- Replies: 4
- Views: 1799
Re: Can't get the timing right
Hi,yes.Cylinder one is on TDC...
- Tue Feb 15, 2022 2:22 pm
- Forum: MK6 (9N) Polo - Years 2002-2005
- Topic: Can't get the timing right
- Replies: 4
- Views: 1799
Re: Can't get the timing right
Hi,yes it is firing but will not start as long as the crank sensor is connected.When I disconnect the crank sensor it will start but cannot rev beyond 4000 rpm since crank sensor is not connected..Which side should the belt not be to tight belt because I have noticed that there is always one side wh...
- Tue Feb 15, 2022 2:06 am
- Forum: MK6 (9N) Polo - Years 2002-2005
- Topic: 2003 VW Polo 9N No Spark
- Replies: 1
- Views: 2061
Re: 2003 VW Polo 9N No Spark
Hi,if the timing,compression and crank sensor are all good then you need to chaeck the ground and power supply to the coils.If the ground and power supply to coils are all good then check the signal wires from coils to ecu(engine computer).if the wires are fine and the fuel pressure is good then the...
- Mon Feb 14, 2022 10:33 pm
- Forum: MK6 (9N) Polo - Years 2002-2005
- Topic: Can't get the timing right
- Replies: 4
- Views: 1799
Can't get the timing right
Hi,I have two polos Bby and bky engines.The bky engine was rebuilt by the mechanic.After the rebuilt was complete, the car could only start if the crank sensor is removed and the cam sensor still connected.When you reconnect the crank sensor the car would not start but demonstrate difficulty in the ...