UK-POLOS.NET - THE VW Polo Forum

i think you should pretty much take everything from pq25 to make it work, i don't think a lot is backward compatible.
so bcm, tacho, climate control, airbag, ecu etc...


thanks for your reply 8) i think airbag and clima will work because 9n3 and 6r gateways are the same code, change only the ...

Ah sorry my mistake thanks

Hi everyone 8) 8)

After a long time I have found a 6q1937049f (i've D version) at a good price (in the end the only additional feature of the 6q0 is the headlight washer if I'm not mistaken, and I'm not interested).

But before taking it I asked myself: why not try to fit a BCM pq25? I did a quick ...

Are you certain that the pins for the rear doors are present in the BCM?

https://www.mypolo.nl/xenforo/threads/pin-bezetting-bcm-polo-9n-9n3.20621/
Check here for the pin layout of the BCM

I have the image in full scale if needed, just DM me


I've elsa..pin are the same and i try it on bench ...

Check Adress/Module 46 in VCDS
Look for the coding, could be coded for 3 door


46 is coding for 5 doors (central lock work)..repeat problem is bcm what elsa say 2 different integrate code..one for 3 doors and one for 5...all tell me that is possible to coding but no one is able to tell me how ...

Maarten wrote: Tue Sep 10, 2024 11:43 am Yes you're correct my bad

Then it doesn't matter

6Q2 low line
6Q1 medium
6Q0 medium/high

Should work

As I wrote, the rear doors don't work (the courtesy lights don't turn on and the dashboard doesn't show the open door image)

Does this BCM has 3 connector slots? Or just 1?
Top small square one is for alarm
Middle one for front doors
Lower one for rear doors

In the latest version on VCDS there will be a list of code optional.


I think you're talking about the comfort module, the bcm is this https://i.ibb.co/gwQdLnb ...

hi,

I bought a new bcm for my polo 9n3 (6q0937049f) many people told me that it doesn't matter if it comes from a 3 or a 5 door. today it arrived and i immediately tested it on the bench, the new bcm comes from a 3 door (mine is a 5) and therefore i mount it but it doesn't detect the opening of ...

https://i.ibb.co/xMFJtwC/20240312-135112.jpg

I login by entering "40168" but after 2 seconds it reloads everything and the highlighted text appears (in the various measurement blocks of the power steering control unit there is nothing that refers to the g85, but only to the g250; which having ...

no, I can't access block 04 (if that's what you mean);
My Polo doesn't have an ESP from the factory (thankfully).

I tried to do a lap and I don't have power steering, so I loaded my sister and gave her the g85 telling her to turn it as similar as possible to my movements... it's difficult, but ...

Hello everyone :mrgreen:

I'm trying to retrofit a g85 sensor on a polo 9n3 (BNV engine) non esp to subsequently install a sports steering box (no g250 sensor).
The sensor I purchased is this:
https://i.ibb.co/g4MkFtM/Screenshot-20240301-102851-Kleinanzeigen.jpg
https://i.ibb.co/svrdHtg ...

so in the meantime I received the subframe from a 2015 Fabia, plus all new Meyle reinforced arms and heads

https://i.ibb.co/PcH2dKL/1000096094-01.jpg

now I think I have also found the g85 to use derived from a 9n3; I'm waiting for the pin photos to see if it's in good condition (in the meantime ...

I would take advantage of the post to ask if it is possible to mount the same rack (6r1423055p) on a 9n3 polo without esp (1.4 tdi sportline so sport chassis)


Interesting question. According to the diagrams for POLO 9N3 it is the same as for 6R, that is, if it has the G250 sensor connected ...

I would take advantage of the post to ask if it is possible to mount the same rack (6r1423055p) on a 9n3 polo without esp (1.4 tdi sportline so sport chassis)

Hello everyone,

I am writing from Italy and I need to find the pin code to access the immobilizer to encode a transponder, how can it be found? i have a chinese vag cable 20.4 but it does not access the eeprom (i tried to use a vag eeprom programmer 1.19)

Thank you