UK-POLOS.NET - THE VW Polo Forum

Some ideas:

When installing Bixenon headlights, the 4 parking/side lights are powered individually, but you already did this according to your comments, link...?
The original wires in the front for these lights with Halogen headlights need to be isolated (T10) - check insulation - ...and install ...

ok.
I unscrewed the right rear lamp, it looks like it left the factory yesterday. I put in a new bulb.
I turn on the VCDS and do the output test again.
The indicator light :idea: will be on when I turn on the rear left and right side light :(
I do not know why I saw only the right one yesterday ...

OK Ciclo.
I did a output test with the VCDS today.
All lights are working properly.
The indicator light on the counter appears when the rear right (passenger's side) position light comes on.

I have one more question. is it possible to do so that the low beam lights do not turn on when I want to ...

no no, my T5 doesn't have front fog lights

I took a picture of the original BCM encoding before starting work.

A0A0303A0E612433802848102C2B8C550090430F60040000300000000000
https://drive.google.com/file/d/12fYUeo3LVYKl1D3DCA2hkg25UlolDiRz/view?usp=sharing

I don't have any LED lighting, only original VW head lamps.
Later, I will check all ...

Thank you Ciclo!
there are no error codes :D

Poniedziałek,05,Wrzesień,2022,19:50:35:21977
VCDS -- Emulator VAG/VAS pracujący w środowisku Windows, uruchomiony na Windows 10 x64
Wersja VCDS: AKP 22.3.1.4 HEX-NET CB: 0.4615.4
Wersja danych: 20220606 DS337.0
www.vcds.pl


VIN: WV1ZZZ7HZCH042768 ...

here's what i did:
1) upgrade my BCM 7H0937087H --> 7E0937090D but it didn't work with my key --> 7E0937090C
2) - Left Bixenon headlight : a wire from T14g/12 connector to T73b/3 BCM
- Right Bixenon headlight: a wire from T14c/12 connector to T73a/5 BCM
3) SA2 --> Run two 2,5 mm2 automotive wires ...

We assume that your T5 is a vehicle without Start/Stop, right?


Yes you're right 8)

Niedziela,04,Wrzesień,2022,21:09:32:21977
VCDS -- Emulator VAG/VAS pracujący w środowisku Windows, uruchomiony na Windows 10 x64
Wersja VCDS: AKP 22.3.1.4 HEX-NET CB: 0.4615.4
Wersja danych: 20220606 DS337.0 ...

turn on the high beam:

Niedziela,04,Wrzesień,2022,13:24:00:21977
VCDS -- Emulator VAG/VAS pracujący w środowisku Windows, uruchomiony na Windows 10 x64
Wersja VCDS: AKP 22.3.1.4 HEX-NET CB: 0.4615.4
Wersja danych: 20220606 DS337.0
www.vcds.pl


VIN: WV1ZZZ7HZCH042768 Numer rejestracyjny: POLO ...

HI,
thank you for your interest.
here's what i did:
byte11, bit0 -> enable (I entered it manually because there is no bit 0 on the list, only bit 6,7)
byte23, bit0 -> disable

when i turn on position lights or dipped beam i have bulb indicator but i haven't faut code :roll:

Niedziela,04,Wrzesień ...

hi,
installed for my VW T5 2011 bi-xenon.
I did everything according to the instructions and everything works fine, but the light bulb appears on the meter when turning on the lights and the error 03906 is displayed.
I cannot deal with this problem.
I do not have automatic lights installed.
Maybe ...