UK-POLOS.NET - THE VW Polo Forum

i se that this wire For example on Skoda Fabia T17a/7 (output) "56x" To the contact T41a/41 of the steering column switch, power is taken from it for high beam. I think it's overkill but I'll try T16/9 to T17/7 i think i repair same wire which is now installed already by default :mrgreen:

It have stop signal😂 if you about that;) Fog and reverse https://youtube.com/shorts/aCIDcBhg20k?feature=share And i don’t really understand the diagram, t 16/ 8 is not correct and i need t16 / 9 to T73A\62? I think T16/9 connected to T17/7 , or it connected to fuse and from fuse to T17/7? 222222.JPG

https://youtu.be/i9VlboxHDcY/youtube So you have installed pq26 bi-xenon headlights, right?.... or are these bi-xenon headlights you've installed used on both platforms? on pq26 this bixenon work perfect, on my pq25 only after wire/ bcm 090 and so on Have you installed another two new wires for the ...

some owner of polo, jetta and my rapid mention that only if I FIX eeprom it can help in my situation and only with VCP or Odis. Do u know something about that? PWM Value with POS/TFL lights and activated Pos-lights Well, in that case (low and high wired from BCM to headlights), you should modify and...

part from the signal from the light switch to the BCM T73b/29 for DRL BCM T73b/29 for DRL i connect it direct to T17/3.i try connect it to wire from SB17 but no difference. drl.JPG have you installed two 'NEW' wires from the BCM to the xenon headlights? Yes 2 from Hibeam pin to L-A1,R-B1 New BCM co...

Thanks
Else
Drl not stable and flickering, drl not working as parking light and no with lo bean. Can’t blink with Hibeam if lobeam not active

I run outside to check new code
Up

Thank you Ok i add T17/13 back. You new code change work of Steering column switch, hi beam with this code work non stop and unpossible to blink with it. Everything else work is the same as before. Adaptation Channel 53-0-0,54 0-0. some vag owner of polo, jetta and rapid mention that only if I FIX e...

Thank you i post 2 pic t17 after evolution :D I am not sure if i need cut T17/14 or reconnect other side to T73A/45 or it already connected? https://vwts.ru/skoda/rapid/skoda_rapid_nh_wd_2012_eng.pdf 7E0937090 BCMPQ25 0736- H80 2 error i can remove but how is help? turt signal right still make a par...

after some manipulation today i forgot make vcds scan but i have from carista. there no difference in fault light code anyway just for test The pin from T73B/29 that come to T17/3 i remove it from socket , and drl stil working

Thanks In my case T16 as I understand, no t41. Anyway if there something special i need to do after harness complate in case coding? i have BCM t6 090. Almost work except Hi beam no flashing without lo beam. Drl led flashing as crazy and didn’t working on another two position. All back light and lig...

Thanks
from there, part of the wire go to bcm and rest to new T10 connector of new autoswitch and T40?

10 to 14 pin set ,has anyone used them to make wiring easier ?

This wire set also fit on skoda with max bcm and bixenon drl?https://nbcarperformance.nl/shop/polo-6 ... pterkabel/

Thank you
Some of the installer say 7HO better. And yes price up x2 for me
I didn’t need nothing from new options, only the full work of bixenon headlights.
but I simply cannot find examples of those who put one or the other on the Skoda Rapid, or car models do not matter so much?

Hello

I don't have a polo but a similar platform
For Retrofit bixenon headlights On Skoda rapid 2013 any big different instal t5 7H0937090B or T6 model?
My current bcm 6R0 937 087 P
Thanks