UK-POLOS.NET - THE VW Polo Forum

Hello Polos
Has anyone know how to change drl lights from white to yellow?
I met alot of skoda superb in this serup

Hello,
in theory,if instead of a light bulb, i can solder the wires of this led strip , they will work ? in the rear lights?

I have a skoda rapid with max bcm

One of the headlight drl stoping working after i use turn signal on this side. That not happen with other side drl. What could it be?

Hello
Maybe someone has come across this, before I could do a lot through regular OBD AND carista, but now I can’t change anything, even with vcds. No matter what I do it just doesn't work.
for example, I don’t want daytime running lights with the handbrake up, it shows that it’s on but it doesn’t ...

I see that turning off daylight options via vcds or carista does not affect on it :|

Disabling DRL when the handbrake is UP same, not effect.
Why this happened?
worth trying vcp?

And Sometimes I notice that when approaching the car the rear led lights come on ,maybe 5sec not at full capacity ...

is any body heer

Is an adapter required to install this steering wheel on pq25?
The only thing I use is the phone and music buttons, so the rest will be just for fun.

Hello :wink:
and a taillight with LED turn signal
tail have led only for drl/parking. Fog, stop,reverse and turn working through original bulb :idea:

Now there are other errors that are no longer related to the left turn
Component and/or Version: BCM PQ25 Max4 H80 0736
Software Coding ...

In the end i have found problem and that no angle sensor. 2 pins that I pulled out from 10/10 were rewound in one layer and apparently made a short circuit, I separated them and the blue indicator disappeared :D also there are no errors and the fog with the corners start worked perfectly :!:
The ...

Good day

https://youtube.com/shorts/5YxNP2ZhM0w?feature=share
I haven’t touched the vcds yet and just drive to the store in the morning , all turn signal was work as clock out/inside, yes i have error Control circuit parking light, lift in (carista) and warning lamp on cluster but turn signal and ...

Hello
Byte19=56HEX is the only one that might make sense. Test it
Wow that help partially :!: outside turn led work perfect :mrgreen: but inside still work as crazy :!:
https://youtube.com/shorts/jdjsNeSggys?feature=share
Thursday,01,June,2023,21:13:20:00009
VCDS -- Windows Based VAG/VAS Emulator ...

you mean that DRL worked perfectly cheating with Scandinavian lights, we must get used to telling the truth of things
at that time I did not have led tail or only one(right)and there was a problem that it did not work correctly,
Capture.JPG
But everything was decided with the replacement of the ...

For turn signals, and as a test, you can test by increasing the resistance (of those resistors sold to prevent CAN-Bus failure) in the front turn signal wire (in a well-ventilated area of the engine compartment).
You must take into account that the consumption of the turn signals of one side of the ...

Hello
Try 77 HEX in BCM Byte18... (to know what happens with the turn signals
turn signal still working as crazy
To have access to the first method that you say for lighting adaptation, the language setting of the VCP program must be in English.
Here you have a video of how to access and modify ...

In other models (MQB, etc) the parking lights of the LED modules can be Adapted with the same brightness as the DRL/TFL, and in my humble opinion the car headlights look more beautiful/brighter... so I wouldn't worry too much if you can't find that lower brightness for your parking lights
Hello
i ...