UK-POLOS.NET - THE VW Polo Forum

I see that turning off daylight options via vcds or carista does not affect on it :| Disabling DRL when the handbrake is UP same, not effect. Why this happened? worth trying vcp? And Sometimes I notice that when approaching the car the rear led lights come on ,maybe 5sec not at full capacity, They a...

is any body heer

Is an adapter required to install this steering wheel on pq25?
The only thing I use is the phone and music buttons, so the rest will be just for fun.

Hello :wink: and a taillight with LED turn signal tail have led only for drl/parking. Fog, stop,reverse and turn working through original bulb :idea: Now there are other errors that are no longer related to the left turn Component and/or Version: BCM PQ25 Max4 H80 0736 Software Coding: 6C980F2000210...

In the end i have found problem and that no angle sensor. 2 pins that I pulled out from 10/10 were rewound in one layer and apparently made a short circuit, I separated them and the blue indicator disappeared :D also there are no errors and the fog with the corners start worked perfectly :!: The onl...

Good day https://youtube.com/shorts/5YxNP2ZhM0w?feature=share I haven’t touched the vcds yet and just drive to the store in the morning , all turn signal was work as clock out/inside, yes i have error Control circuit parking light, lift in (carista) and warning lamp on cluster but turn signal and in...

Hello Byte19=56HEX is the only one that might make sense. Test it Wow that help partially :!: outside turn led work perfect :mrgreen: but inside still work as crazy :!: https://youtube.com/shorts/jdjsNeSggys?feature=share Thursday,01,June,2023,21:13:20:00009 VCDS -- Windows Based VAG/VAS Emulator Ru...

you mean that DRL worked perfectly cheating with Scandinavian lights, we must get used to telling the truth of things at that time I did not have led tail or only one(right)and there was a problem that it did not work correctly, Capture.JPG But everything was decided with the replacement of the Lig...

For turn signals, and as a test, you can test by increasing the resistance (of those resistors sold to prevent CAN-Bus failure) in the front turn signal wire (in a well-ventilated area of the engine compartment). You must take into account that the consumption of the turn signals of one side of the...

Hello Try 77 HEX in BCM Byte18... (to know what happens with the turn signals turn signal still working as crazy To have access to the first method that you say for lighting adaptation, the language setting of the VCP program must be in English. Here you have a video of how to access and modify the ...

In other models (MQB, etc) the parking lights of the LED modules can be Adapted with the same brightness as the DRL/TFL, and in my humble opinion the car headlights look more beautiful/brighter... so I wouldn't worry too much if you can't find that lower brightness for your parking lights Hello i t...

We did it Thanks Ciclo thanks Alex
led drl work as Parking and with lobeam.One thing now how to make it work less or more power with lobeam and solve the problem of turn signals

Hello, it seems to me that this lamp has already flashed before and returning to previous codes helped to make it disappear. I'll check today if it's only caused by the last coding. Update Ok I double check, if i back to Fourth test code, blue lamp disappears. 6C980F2000210400000808303E4B0CC00F40730...

Aa ok
Yes blue light start workinh non stop after i start engine and we add new wire 16/9 and new code in this moment.
I could damage this sensor by pulling the bottom cover?
I remember it was difficult for me to turn off T 16 to install the pin and I strongly delayed that cover

SB21 Red black 0,75 10A experiencing problems when turning the steering wheel. Check the connections and connectors that you touched there i not remember problem when turning steering whell :shock: where is T16/16 area? Or cluster? In some of the links to the videos that you have posted in this thre...