UK-POLOS.NET - THE VW Polo Forum

Hi,

I my Polo AC starts working automatically when I turn fan ON by twisting fan knob.
Can it be adapted? I would like to turn setup AC manually by button AC only.

Best regards
Lucas

Many thanks for clarification.

It's hard to find 6R0953507C on aftermarket. Much easier 6R0953507A and 6R0953507B. I'm wondering If I can switch lever with MFD from 6R0953507A to 6R0953507B?

Does my 1.2 TSI CBZC need add CCS wiring and connect with BCM or harness is included in car, so that's why ...

With your MFD-low, if you have or install :arrow: https://uk-polos.net/viewtopic.php?t=65096 the right stalk/lever with the TRIP - OK/Reset switches you can access some more information.

https://www.team-bhp.com/forum/attachments/diy-do-yourself/1264946d1690923877t-vw-polo-diy-removing-upgrading ...

When you copy the BCM coding from the forum it is associated with a completely free magic seed for activating high beams. It is uk-polos.net's way of thanking you for the trust placed in this magnificent forum. :wink:
Now it's clear :lol:


Now seriously, Byte18 Bit5 enable, or Byte18 from 47HEX ...

To make High beam work, try this new BCM coding:

7CB02B3F08A1000001300F916EEB0FD05A40672F60053041200000030000

https://uk-polos.net/viewtopic.php?p=598823#p598823... 🤷‍♂️

Interesting. I verified all checkboxes and I had choosed as you showed. So I putted your new coding and works now. Why?

P.S ...

3 for high beams to work permanently (by pushing the lever), the low beams must be ON. ... :?:

Yup, and they didn't work even I switch from Auto position on low beams ON or during night when Auto position of switch turn on the lights.


I don't understand correctly what you mean due to the ...

ciclo wrote: Mon Aug 14, 2023 7:28 pm 3 for high beams to work permanently (by pushing the lever), the low beams must be ON. ...

Yup, and they didn't work even I switch from Auto position on low beams ON or during night when Auto position of switch turn on the lights.

Hi Again,

I have some problems:
1. Front fog lights works but during they are switched on, doesn't light indicator on dashboard. How ever indicator of rotary swith lights correct.
2.Rear fog lights works, indicator on dashboard works but light on rotary swith doesn't work.
3. Full beam headlights ...

Hi,

I tried to adapt like this:

https://i.postimg.cc/G3fNZDKm/coding.jpg

And get info about succesful coding process.
How ever function doesn't work so check again - checkboxes for Bit 3 and Bit 4 are not active like before coding. Whats wrong?

Same situation with Self rain closing. Succesfull ...

It works.
Hughe respect and big thanks.

Hi,
Finally I made my cable.
Just for fun a little bit Motorsport technology



Can I ask for help with VCDS coding? As I see manual I need special new coding.

To be hones I would like to avoid big investments in this car. Is it one reliable option (if I compare costs of rest stuff to connect phone like microphone, cables etc. etc.)?

Hi,

My polo 2013 has stock RCD310 radio. I consider to add cheap Bluetooth module to play music from telephone.
How ever I read that bluetooth has to be switch off when someone is calling and we want to answer and talk. It suck, so now I consider to change radio on another with internal Bluetooth ...

centimeters.

https://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=Laser+3932+Terminal+Tool&_sop=15

Ah, so this same type. OK.

Are you sure about wire cross size for relay pin no1?
I have relay holder with a piece of stock wiring loom. Pins 1, 3, 5 has this same diameter. Bigger than you ...

A=20mm
B=60mm
C=10mm
D=135mm from the original connector T10/2 to terminal 37a. The length of the wire for terminal 1a will then be defined.
F Fog signal = 85mm

Centimeter’s, I’m pretty sure? 😉
Thanks a lot.



With these lengths you have plenty to make the rectifications you need when crimping ...