UK-POLOS.NET - THE VW Polo Forum

otherwise, thank you ciclo for your help, I wouldn't have finished it without you. big thanks

after the last coded everything works. does not display a fault on the dashboard. but in the 09 address, there are defects regarding the high beams.

Chassis Type: 2H-VN81 (6N0)
Scan: 01 03 04 08 09 15 17 19 22 25 32 56 69

VIN: WV1ZZZ2HZCA056596 Mileage: 145520km-90421miles

01-Engine -- Status: OK ...

well thank you . everything is fine with the previous coding, except for the high beam malfunctions. I know there are no light bulbs, but an aperture. but the managing director thinks that there are light bulbs. that's why I thought if we couldn't solve it by coding 😬 I'll try coding today, thank ...

can the control of the bulbs on the fog lights be turned off? thank you

Good day . everything adjusted. the lights work. the problem is that the remote light works but displays an error.

on the last coding, it says the error of the reversing light.additional lights are installed there.
3C0002380C01000000300C316C4B84D40F80654E60843040300000020000

on the previous coding ...

sorry, I didn't notice this post. I will change it tomorrow via vcp. what could be the problem that it is writing to me
03429 - Activation of the right adaptive light
011 -
Open circuit freezing:
Fault status: 01101011
Fault priority: 3
Frequency of failure: 1
Reset counter: 7
Mileage: 145509 km ...

Good day . the cable from the light switch to the bcm is connected. dipped beam lights work. main beam lights work, direction lights work.

the fog light only works for me. daytime lighting is also on with the parking light if the light switch is at 0. if I turn on the parking lights, only the ...

sorry . I'm sorry. thank you for your help . I will come home from work and immediately try coding. I will send a scan

remotes work. low beam lights (mainly lights) do not work, daytime lights are on together with side lights. if I turn on the marker lights, only the interior lighting is on. I mentioned the fog lights above

Good day . coding done. mainly the lights and fog lights do not work. I connected the fog lights according to the forum Static Cornering Lights. Retrofit. (Amarok 8K0, 8K1, single cab)

Remove and isolate T17/8 light switch connector original wire (white/yellow). Remove SC60 fuse. 20Amp

Install new ...

now there are no headlights in the front. I can only hear the shutter click when the high beams are on.

VIN: WV1ZZZ2HZCA056596 License Plate: JJ
Mileage: 145500km-90409mi Repair Order ...

VIN: WV1ZZZ2HZCA056596 License Plate: TERAS
Mileage: 145500km-90409mi Repair Order:



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 2H-VN81 (6N0)
Scan: 01 03 04 08 09 ...

good day. connection according to the forum. dipped beam lights do not work. I do not get 12 V on fuse 55 and 29. only direction lights work, daytime led lights, parking lights, please code them. thank you

Chassis Type: 2H-VN81 (6N0)
Scan: 01 03 04 08 09 15 17 19 22 25 32 56 61 69

VIN ...

well thank you . I will then try to use this switch

Good day. Thank you. I wanted to know if it would be possible to implement it with the components I wrote. I would also like automatic lighting, which switch should I use? well thank you . I am already working on the electrical installation.