UK-POLOS.NET - THE VW Polo Forum

Forget the kufatec instructions and focus on installing the wires like in this diagram. Physically check what you already have installed. https://uk-polos.net/viewtopic.php?p=490258#p490258 Autoscan? Please remind us which engine your Polo has to verify the correct pin for your ECU. You must make s...

I don't think the fault detected is related to the 'new' BCM/GW (09/19 Addresses), I think it is 99% due to the Basic Setting of the G85 slip ring in the ABS unit (03 Address). Maybe you are not doing it correctly, have you started the engine to do the Basic Setting? For the 6R Europe 2009-2014 , t...

I don't think the fault detected is related to the 'new' BCM/GW (09/19 Addresses), I think it is 99% due to the Basic Setting of the G85 slip ring in the ABS unit (03 Address). Maybe you are not doing it correctly, have you started the engine to do the Basic Setting? For the 6R Europe 2009-2014 , t...

Steering Angle Sensor (G85) Calibration . You can do it this way (9N, 6R 2009-2014, etc): http://wiki.ross-tech.com/wiki/index.php/VW_Polo_(9N)_Brake_Electronics_(Bosch_8.0) Every time a different G85 sensor is calibrated, that is, if you do the basic setting on a new/used sensor and subsequently r...

Steering Angle Sensor (G85) Calibration . You can do it this way (9N, 6R 2009-2014, etc): http://wiki.ross-tech.com/wiki/index.php/VW_Polo_(9N)_Brake_Electronics_(Bosch_8.0) Every time a different G85 sensor is calibrated, that is, if you do the basic setting on a new/used sensor and subsequently r...

Hi, It was manual from factory. After upgrading the BCM I added the Remote Key (Center Locking works perfectly with Remote Key, Boot Lock also). Hello Kratosmr, Can you help me with remote key retrofitt? What manual did you use or a link with instructions for it? Buci Hello, Can you help? Thanks

Hello Ciclo, Gateway changed and coded with out error. Levers with cruise control and trip control arrived with the slip ring included. I replaced the lever and the slip ring. After starting the car I have servo and esp error on the dashboard?! The wheel was hard to turn left and right. I did not ho...

The vcds arrived. BCM arrived. Soon. I will have cruise control soon. Pictures will be uploaded soon.

iichel wrote: ↑Fri Jan 19, 2024 3:45 pm I'd suggest 0,35mm2 where specified. Makes fitting the wires a lot easier into the connector

Ok. I will buy as specification. Your suggestion: pvc or silikon wires?

Yes, the kufatec image is not accurate for those stalks. I guess the contractual thing is what is written in the description. They will have to improve. Nowadays with smartphones, with people's zero or almost non-existent ability to concentrate (maximum 3 seconds in images 🐟 :lol:) and the lack of ...

Reviewing the kufatec website: https://www.kufatec.com/en/comfort-retrofits/mfd-instruments-cable-set-for-vw-polo-6r-seat-ibiza-6j-49074 (MFD) https://www.kufatec.com/en/assist-park/cruise-control/cruise-control-cable-set-for-vw-polo-6r-seat-ibiza-6j-37921 (CCS) https://www.kufatec.com/en/assist-pa...

The wiring for CCS is the same for any 6R regardless of the IC model installed (except ECU pin/terminal). I assume that what they are referring to is the option of purchasing the complete wiring (CCS + TComp) with the combination steering switch (stalks) with buttons on the right stalk for the Trip...

Yes, all the other pins for CCS are the same. The cloned versions of VCDS work the same as the original ones, but as I told you, it depends on the level of hacking and updating. You will be able to do everything you propose. The super bad side is that you don't reward the super/excellent work that ...

for central locking, you'll need an 087 bcm and new keyfobs. you need a specialist to learn the keys to the immobiliser. your keys will need to be 434MHz for anything other than the north america region. it's 315MHz for that region. coding of the new bcm and learning the remotes is can be done with...

CGPA https://i.imgur.com/dBb4tJx.jpg https://i.imgur.com/uVElfmG.jpg https://i.imgur.com/IRSpau7.png Thanka Ciclo! So on the ecu side it is 69 pin. All other number pins are the same as is on this topic? When you say "cloned" does this mean that I wont be able to set up the bcm or other o...