UK-POLOS.NET - THE VW Polo Forum

Hi, My shock and rear spring pretty much settle from first install, I did prefer the standard load for tyre pressure for my car 36psi at the back but with original I prefer the comfort pressure of 32psi with same tyres.

Hi, Ive found my combination of Sachs 317 357 and SUPLEX 39445 with bumpstop ( 6Q0512131C) as comfortable as the original standard rear shock and spring.

Hi, Do you have arm rest and rear cup holder? If so I'm certain those are clips broke from the arm rest side or/and rear cup holder trim. The mechanic would have removed the arm rest / cup holder to gain access to adjust the parking brake cable.

Hi, My polo does have panoramic sunroof.

Hi, Ive used the following tools for removal.

https://i.ibb.co/k21J2HWB/20260101-010450.jpg

Plastic trim removal tools is the original or copy of vw tools (Got it from ebay). Ive brought it for the front door trim panel when I was doing the folding mirror mod.

I didnt have access to the erwin ...

Hi, Apart from the hidden plastic screw under the seat, there is only 5 clips (2 types) holding the trim piece 3 on top and 2 at the bottom.

In my car those circles is just colour match cover which feels stick on, if you push it, feel like is hollow underneath, i thought they holes for bolts or screws.

You can used VPN software to by pass the restrictions for now

When I did my rear emblem camera, it did comes with the new emblem, I did think about changing the front emblem to the new style. I had changed the front emblem to black before by removing the entire front top grill, luckily nothing broken just a sore thumb from pulling.

If lve recall new emblem ...

I've replaced my Sealbelt but fail MOT on Broken front coil spring and ARB droplink. Those was replaced only two years ago,
Meyle HD droplinks and Orginal factory shock and spring. I don't recall hit any pothole hard. I did notice one side is slightly higher than other by a few mm awhile back but ...

Ok, I've managed to find the values in the pdf I have in my computer.

Shoulder - 40nm
Belt tensioner - 40nm
Rail - 20nm

No mention of renew bolt.

Hi, My polo 6c Rline 3 doors is due MOT soon, I've realise this tear in my driver seltbelt may cause my MOT to fail.

https://i.ibb.co/k68fW2Z3/20251020-003449.jpg

I brought a seltbelt replacement (I like the webbing on 6R3857706BTTM but its not what i have in my car). It's arriving the day ...

Hi, Did you check the harness going into the rotary switch to see if pin 2 is wired (I think, I cant remember if thats the wire for auto function, is been awhile since i did the auto/rain sensor mod). On my 6C is was already wired, I'm not sure if this standard or only specific trim (Mine is Rline ...

My polo have those foam in the A pillars trim from factory and without airbag there. The foam has a part number if I've remember correctly so maybe its something you need to buy separately from the new A pillar trim

If you have vcds or obd11, you can replace with second hand HVac module pretty cheap. Its relatively simple to remove exist module and replace with another. You do need to code match to you existing module.