UK-POLOS.NET - THE VW Polo Forum

Thursday, 28 January 2010, 16:30:34
VAG-COM Version: Release 409.1-US
Control Module Part Number: 030 906 026 E
Component and/or Version: 1,3l R4 MONO 1.3 D71
Software Coding: 00000
Work Shop Code: WSC 00000
1 Fault Found:
00515 - Camshaft Position (Hall) Sensor (G40)
03-00 - No Signal

Right story ...

Thinking of changing my temp sensor as lately my temps seem to take ages to get to the "Optimum Temp".
Normally on my 10mile 20-25min (5mins on motorway) drive to work it would take around 2miles for the temp to reach the "Optimum Temp" (needle in middle).
But lately (yes i know we have had some ...

got a M reg 1.3 and from the oldham area.
I've seen a thread on here about installing one is it true i need to remove some of the coolant from the radiator. ?

where is the sensor & is it a job i could do myself, not much of a mechanic ?
Also how much for a new sensor ?

Forgot to add that the "Warm Air Duct" has split at both ends to which i just taped up the splits.
Dont know if this could be the problem ?

Hello, my trusty old Polo has started developing a fault.
It only seems to occur when engine is warm (ie. just drove it, popped into tescos for 10 mins).
If when starting from cold its runs perfect, turn ignition and off we go, but when the engine is still warm i turn the ignition and it revs so far ...

Ah so it seems mines all in order, thought that was a bit low but seems to be the average.
Was wondering if the lambada sensor needed changing as its a 13 year old car and as I've only had it 1.5 years and have no history of it ever being changed.

I got a M Reg 1.3 and get on average between 300 & 330 miles out of a full tank !

cheers, so its wikipedia thats wrong !

Which Polo's are the mkIV's.
Looking at parts on ebay for mine.
Looking on wikipedia My car is mkIII 94-00 but looking at the pics of peoples cars on here its a mkIV.
My car is a polo 1.3 (only out for one year) M reg.
Anybody tell me what catagory is should be looking for when searching parts and ...

Been looking to get my timing belt changed, when i google it all i can find is estimates for golfs ( which i've heard are not easy to change thus hiking the price up a bit )
I'm in the uk so can anyone give me a quote of what to expect ?
Its a 1.3 polo mkIV m reg

Bought my 1.3 1995 polo in october. Done a couple of trips to Barrow-in-furness from manchester.
I once got out of a full tank + £10 500 miles (went to barrow in this duration).
But at crimbo (going to barrow) gave it a full tank and i only got 300 miles.

Now i thought i got ripped off on a 1 shot ...