UK-POLOS.NET - THE VW Polo Forum

H&R 31013-3 Cup Kit 60/40 would do wonders for your ride...

But DAMN!!! The 6N2 look fantastic in white...

have you checked the groundwires from the switch?

If you remove the cover on the inside of the lid? one of them must be broken... Unless it's the wire in the C-pillar. It shouldn't be a big problem to check...

**** p*** *********!! Cut the brown and red wire and attached it to some exposed metal nearby and the light works fine BUT it never goes off :oops: . Can someone give me some adivce here because i know little about electrics, i thought the switch in the boot lock would have turned off the power and...

You have to use VAGcom to code the car to tell it that there's xenon in the headlights... Otherwise it flickers...

nigelelliott394 wrote:This looks awesome! The ride height is absolutely perfect... is that definitely a 60/40 kit it's running? I wasn't sure that would work with 16"s

Yeah. It's the H&R Cup Kit 60/40 - 31013-3 Works perfectly with the 16's

Sux that almost all the pictures don't work...

bradley1983 wrote:I now miss my old silver Gti now.

Car looks clean. Not too sure about 17" wheels tho. 16" looks nicer in my opinion. But it's a nice looking car and the bra looks cool.

I thought the same thing... I really love the 16's on it now

cheers. Does the dome fit right into the headlining without modification? I've found a supplier on Ebay but for the light and adapter it's £60! No. It's a bi larger. You need the metal frame for the headlining to get it "to stick"... But with the frame it's very easy to mark where you hav...

love it! Did you need to modify the wiring for the dome light? I think the RX wheels look really good, much better than the first ones.... I actually bought it as a kit with an adaptor to put between the original wiring and the light. And then I had to run a wire down to the lightswitch to light up...

Replaced the bulb when i first got the car - no joy. The dash 'boot open' light works perfectly. Microswitch - replaced. Need a multimeter to see if any power is reaching the terminals, if not god knows how the cables have been damaged. A common fault is that the break in the rubber tube from the b...

Hi. Thought it was time for me to share a little bit more about the old GTI :) I've had i for a little more than 2 problemfree years (thank god, knock on wood and all that stuff :wink: ) I'll try to get it all up to speed with what I have done to it so far. Here is a few shots of the car as I bought...

dantheram wrote:Thanks for the info, i have done the job now but its not the microswitch which is at fault because i still have no boot light.

+
What about the light on the dash when the boot is open... Does that work?

And have you checked the wires and connections to the bulb? Or the bulb it self

I know this has been covered a thousand times on here but can i get a quick refresh on replacing said item? I have the trim off and can see the lock mechanism behind the boot handle, where exactly is the light microswitch and do i have to take out the mechanism to replace it? Thanks, Dan It's only ...

Well a few has replied that this picture should be entered. So here goes

I'm having mine changed next week. They started making the same "popping" sound when I put my H&R Cup Kit on. I could see they were worn. But the change in angle didn't go down well with them