UK-POLOS.NET - THE VW Polo Forum

The OEM ones you just push the bulb into it and job done, I have no idea on the new ones. Heres a pic...

Hi guys,

got some smoked side repeaters from ebay but when I took my original ones off the car the back of them is different. They have a part sticking out which the bulb fits into but the ebay ones dont, can you remove the part, dont want to break it or should be get different ones?

Cheers

Hi guys,

does anyone have a clifford alarm installed?

Whenever I use my wipers the stupid LED keeps flashing or some reason, anyone have any issues or know where I can get it checked out? pref in the midlands/oxon area?

Cheers

I ordered the Powerflex front/rear bushes along with the Cupra ones. Once they are fitted will report back with results

cheers mate, is the cupra part same as the powerflex part?

Did you buy a kit? found this place not sure if its the cheapest

http://www.jbsautodesigns.co.uk/listing/59/bushes

super pro? any links mate?

Hi guys, since having my car lowered on coilovers the bushes are starting to make annoying noises, took it to the garage this morning and was told to get the front wishbone rear arm bushes replaced. Im thinking about getting all the bushes replaced now as Im sure something else will need to be repla...

Hi guys, I have a LED interior bulb in my 9n but in the middle setting where it should turn on when the door is open I get about 2-3 leds lit up (abit dim), anyone else had this issue? I tried another LED one and its the same, there are about 6 small LEDs in the bulb but for some odd reason 2-3 leds...

his car will be 75bhp? so roughly 100bhp he will get out of it. 150bhp your looking at 1.9tdi

Decat and Remap would do it, not sure about the PD160 intake etc, doubt it makes that much difference on this engine. Check out RevoTechnik they have a deal on remaps at the moment i think.

As title please and in good working condition

Thanks

I had the samething happen on my BMW. What I did was dump the airbag and fit a 3ohm resistor (not sure if its different on the polo) and wire up a button on the dash for the horn instead. Bloody alot of hassle wouldnt want to do it again.

Doh, ok cheers mate

Hi guys

anyone know what bulb the 3rd brake light takes?

Thanks