UK-POLOS.NET - THE VW Polo Forum

Hard reset did not work.

As far as the BCM goes, coding looks okay to me. I'm a bit worried about some errors in your airbag module though but maybe that's for later... I still need to change the airbag module from 4UE to 4UF. I have it however I will change it later. I was wondering since it can be ONLY coded ONCE, if I i...

Hey ciclo,
I cleared DTC's, and then checked but it still didn't work. I have attached the CSV log for you...
https://mega.nz/#!HY11DZpA!rdu_b59wNa06 ... zCgpqcyOsQ

I will now do hard reset...hopefully it will work.

Latest Auto-Scan: Friday,12,May,2017,09:23:25:33719 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64 VCDS Version: 17.1.3.0 (x64) Data version: 20170320 DS267.7 www.Ross-Tech.com VIN: WVWZZZ6RZCU000000 License Plate: ------------------------------------------------------------------...

Hey Ciclo, That was my previous wiring. This is what I have done now and my new problem is the one in the video. https://postimg.org/image/n7imp317z/ As soon as I plug the heated elements wiring into the kufatec grey connector and test it both pins light up as ground. When I take one pin out then te...

Hi iichel,

I have made a video of the problem:

https://www.youtube.com/watch?v=GU4BqcgVqyg

Basically, when the Kufatec wiring is connected to the heated pads; both connector pins show as ground. It's annoying me so much. I don't know how to fix it. It is the same for both seats.

On both sides of the connector on the multimeter it is showing as ground for both. I'm really confused. This is for passenger side currently. Haven't touched drivers side.

I have now done the wiring and the kufatec white connectors are receiving 12.71v. The fuse is providing around 12.17v. The problem now is that when the car is fully on, i press the button to turn it on and the orange light turns on for a second then turns off. Then it doesn't turn back on. The fuse ...

Hi iichel, Thanks for your comment. :P Yes. That is what i did. As that was the formula that I had in my head to make it work :? . But ciclo made it clear for me. :lol: There is one (very thick) red cable that I need to "borrow" :mrgreen: power from. I need to use a 2.5mm² vw repair wire a...

Please forgive my terrible drawing. :mrgreen: :mrgreen: :mrgreen: :mrgreen: This is what I have currently done. https://postimg.org/image/bavrmqi1z/ Also Ciclo, yes ignition was on. Would anyone know how to remove the connector from the fuse box (large connector) I have this but it's impossible to c...

So the problem is the fuse cable. It is not providing any
voltage (power) to the kufatec white connectors. Could anyone please attach a photo of how they did the fuse wiring as mine is wrong. The ground is fine.

Thanks

fuse? power? buttons backlight? The buttons have backlight. I spent a good few hours with the fuse wiring and trying to sort that out. However I am unsure how to test it out, if they are getting power from the fuse. (Fuse works fine its brand new). On the drivers side when I am driving, I can feel ...

Here is my auto-scan: Monday,08,May,2017,21:04:06:33719 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64 VCDS Version: 17.1.3.0 (x64) Data version: 20170320 DS267.7 www.Ross-Tech.com VIN: WVWZZZ6RZCU00000 License Plate: Mileage: Repair Order: ----------------------------------------...

So, i received the connectors of iichel today (THANKS!!!)

Wired everything up and now when I click the passenger or drivers side button nothing happens. It does not light up or heat the seats.

I'm 100% sure i wired everything up correctly.

Any tips?

Thanks

Thanks. Your kind words mean a lot