UK-POLOS.NET - THE VW Polo Forum

Golf 7.5 DCC project. Wiring. Exterior rear area. 'Couplings' for new original wiring harnesses. I also bought these new original rear harnesses. Each side of the new original wiring harnesses is made up of the wires for the electric parking brake, speed sensor and shock absorber valve. To facilita...

Golf 7.5 DCC project. Wiring. Cabin_Trunk interior area. TIUL_T47 DCC unit connector. Previous information. :arrow: https://uk-polos.net/viewtopic.php?p=598638#p598638 No comment. https://i.imgur.com/P0b5V1k.jpeg https://i.imgur.com/A6wdNgw.jpeg https://imgur.com/zcho7Qq.jpeg https://i.imgur.com/aA...

Golf 7.5 DCC Project. Wiring. Engine/Front area. Wheel Arches_Plenum Chamber_TIUL. I bought the DCC original wiring looms for the front wheel arches :arrow: https://uk-polos.net/viewtopic.php?p=597574#p597574, whose main quality is that they are perfectly sealed. The problem is that in addition to ...

Yes, it looks bent.


...and two shock absorbers from different manufacturers on the same axle, it doesn't look good.

https://i.imgur.com/GrpYcFs.jpeg In my free time I will be building my DCC wiring (intermediate sections), so it will take me enough time for the spring weather to arrive so I can install them outdoors in the middle of nowhere. Being accidentally born on the dark side does not have to be an obstacl...

Hi adityagttsi. Of course, I already provided a 'provisional' BCM coding in a previous post in this thread, but as I already mentioned it is essential that the Dimmer is installed. The 58 signal (58d) is important for several units/backlighting (has the ability to cause various faults in the diagnos...

Thanks for the info my dear Doctor and Master . I believe, 'without technical data' (just personal technical experience), that the Star/Stop system was the culprit for the refrigerant/oil leak trough the A/C compressor shaft in our Golf. https://uk-polos.net/viewtopic.php?p=593479#p593479 The leak b...

Logically, the field of vision improves/opens when you turn on the fog lights, but it is not the most recommended for driving at highway speed limits. At high or moderate speeds, vision must focus on the furthest point possible to anticipate any maneuver. If LEDs are installed in the front fog light...

Thanks everyone for your reports, a simple bolt and how it is installed can noticeably change the driving experience.

Enjoy it!

A good use, or rather a magnificent use, that one can give to front fog lights when there are no foggy weather conditions is as 'static corner lights' and as 'parking assistance when reversing', in fact, the current front fog lights seem to me like a little joke or reminiscence of the recent past th...

Thank you for all the information posted in detail, I think it is best to wait for you to receive and install the Dimmer, the lack of the '58d signal' causes some of the faults diagnosed in the Autoscan. I am keeping an eye on the evolution of this Adaptation to help if necessary, thank you for shar...

4-cylinder common rail engine (1.6 l, EA189)
Engine ID: CAYA CAYB CAYC

Hi Pawel, welcome to this section of the forum.💪🤗 Congratulations on your new acquisition!! the current A1 is very beautiful, we hope you will enlighten us with many/some images of your new and beautiful car. Remember to do a first Autoscan and a complete readout of all adaptation channels from all ...

Please, if possible and since these long-term experiences are very interesting, illustrate us with images, links or installation sketches whatever the tests or installations that you both carry out with these cleaning or improvement methods...
I need to learn. Thanks to both of you!

+1 Although according to my personal preferences I would introduce the following BCM coding so that the CH & LH functions were carried out through the main headlights instead of the fog lights, and so that the fog lights were turned on when reversing (especially for a T5. 1 Highline Executive) w...