UK-POLOS.NET - THE VW Polo Forum

mjmills wrote:if i do not have the alarm fitted, just normal CL (although i have fitted another RCL kit) how many of of these am i going to be able to activate?

i programmed my mate's 9n3 which doesn't have an alarm fitted. it doesn't beep but it does flash indicators and the autolock feature also works.

select central convenience system select adaptation channel3 autolock 0=off 1=on channel4 autounlock 0=off 1=on channel5 interior monitor 0=off 1=on channel6 unlock bleep 0=off 1=on channel7 lock bleep 0=off 1=on channel8 unlock blink 0=off 1=on channel9 lock blink 0=off 1=on channel10 alarm horn ad...

with the original setup you used to have an OEM cold air induction kit, now that you haven't installed an air feed it's acceptable that you lost some amount of torque. you are sucking in the hot air of the engine compartment instead of the cool outside air. once you sort the piping you will see an i...

Went to my local VW Dealer. He said because my 1.4tdi was not high performance as the pd130 i did not need pd oil (VW 505 01) and suggested a different type (VW 505 00). As i was only topping up about 1 litre i didnt mind too much. But i am due a full oil change next month should i use PD oil anywa...

bombertdi wrote:Where are the glow plugs located ???

Thanks

i don't know, but they must have access holes on the block because they are servicable items.

bombertdi wrote:Thanks great pic

What is the EGR and CCV ??

Thanks again

EGR is exhaust gas recirculation system, it basically sends a fraction of the exhaust gases into the intake to control emissions. CCV is crank case ventilation system, where the oil vapors are sent back to the air intake.

here you go mate, 1.4TDi engine bay layout

I put together this little guide about changing the boot light of the Polo with some super bright leds. Although it isn't very specific, it should give a rough idea about the project and the work involved.

Boot Light DIY

I hope you find it useful

logistix

I put together this little guide about changing the boot light of the Polo with some super bright leds. Although it isn't very specific, it should give a rough idea about the project and the work involved.

Boot Light DIY

I hope you find it useful

logistix

As I recently have aquired a taste for spraying I thought Id get on with colour coding the front and rear bump strips on my 9N to match the Votex Kit which I have just done. Does the rear bumper come off easily? Anyone care to point out where the screws are to make my life a bit easier ;-) Already ...

it does look scary for a locating point cool info, thanks for the help

dino wrote:Mine looks exactly the same.

phew cheers, any idea what it is? or why it looks that way?

hello guys, i need some help here. i washed my engine bay yesterday using TurtleWax engine cleaning solution. the result is fantastic, however as i was wiping the engine block i noticed a potential problem. i was afraid the block was damaged by the cold water, but i found this picture from months ag...

No Idea where should the original wiring be located?? Thanks Tony I believe if you don't have the boot light but you have the wiring there it must be on the right side of the boot, next to the right seat belt tensioner housing. If it is not there, you may have to explore a source which is switched ...

Hi Do any of u know if the all the 9N polo`s (playa and classic) have the individual rear suspension setup? (where the coil sits independantly next the shock) :? I have a 9n classic and was looking at a set of coilovers but our supplier here in South Africa can only get me a set that are full coilo...