Along with VCDS
I have this Creader generic code reader that works on the polo 9n3 using KWP
But it does not support the O2 sensor or evap test or any eCU information but for €40 3 years ago it's ok
Search found 48 matches
- Sat Sep 22, 2018 1:20 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Re: Scan Tool Recommendation - SOLVED
- Replies: 9
- Views: 3582
- Sat Sep 22, 2018 8:47 am
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: 2009 1.4 petrol fuel consumption
- Replies: 9
- Views: 3184
Re: 2009 1.4 petrol fuel consumption
295 miles to a tank does sound poor If it were me I would try to get a more accurate figure the tank in the polo is a little smaller than the norm so your not putting as much fuel in it and consequently seem to be always filling it Next time you fill up reset the trip odometer drive 100 Km ( 62 mile...
- Sun Sep 09, 2018 8:58 am
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: ignition key help please
- Replies: 4
- Views: 1374
Re: ignition key help please
To the best of my knowledge Yes you will need a key with a transponder or the immobilizer will kick in on this model the immo is in the instrument cluster and depending on which version you have VDO or Magnetti Marelli Clocks The Magnetti Marelli being a bit of a pig as the chip needs to be removed ...
- Sun Sep 09, 2018 8:40 am
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: stereo and key remote central locking help please
- Replies: 8
- Views: 4197
Re: stereo and key remote central locking help please
Hi Tim You will need both the quadlock adapter and the canbus simulator The quadlock cable converts the existing volkswagen square connector into an ISO which the new radio RCN210 uses the can simulator plugs into the ISO harness then into the back of the RCN210 I think the can simulator is to provi...
- Sat Sep 08, 2018 9:38 am
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: stereo and key remote central locking help please
- Replies: 8
- Views: 4197
Re: stereo and key remote central locking help please
Yep the RCN 210 is a perfect fit more than happy with mine Links are for illustration I am not selling these No recommendation just for illustration of parts required The RCN210 was a good option for me also a polo 9n3 https://uk-polos.net/viewtopic.php?f=43&t=71622&p=537738#p537738 Straight...
- Wed Aug 29, 2018 7:43 am
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Bonnet Cable
- Replies: 1
- Views: 846
Re: Bonnet Cable
You don,t want to pull the bonnet up
You want someone to press down on it while you pull the lever as far as you can then try lift the bonnet
See if that releases it
Or try these suggestions
https://uk-polos.net/viewtopic.php?t=25226
You want someone to press down on it while you pull the lever as far as you can then try lift the bonnet
See if that releases it
Or try these suggestions
https://uk-polos.net/viewtopic.php?t=25226
- Tue Aug 28, 2018 1:07 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Where is the rear 12v boot normally located?
- Replies: 10
- Views: 3459
Re: Where is the rear 12v boot normally located?
You could probably pull back the grey liner and have a look see if the cables are there before you buy anything
- Tue Aug 28, 2018 12:49 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Where is the rear 12v boot normally located?
- Replies: 10
- Views: 3459
Re: Where is the rear 12v boot normally located?
Was already fitted
I would not hold out much hope of the wiring being there as I found when i went to install speakers in the rear doors there was no cable
I would not hold out much hope of the wiring being there as I found when i went to install speakers in the rear doors there was no cable
- Tue Aug 28, 2018 12:47 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Where is the rear 12v boot normally located?
- Replies: 10
- Views: 3459
Re: Where is the rear 12v boot normally located?
this is the connector viewed from the catch for the folding seat
- Tue Aug 28, 2018 12:42 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Where is the rear 12v boot normally located?
- Replies: 10
- Views: 3459
Re: Where is the rear 12v boot normally located?
In right hand drive model on right hand side of the boot
- Wed Aug 22, 2018 7:58 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Expanding the fusebox inside the cabin
- Replies: 3
- Views: 1067
Re: Expanding the fusebox inside the cabin
Glad to hear you got it sorted
Well Done
Well Done
- Fri Aug 17, 2018 8:58 am
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Expanding the fusebox inside the cabin
- Replies: 3
- Views: 1067
Re: Expanding the fusebox inside the cabin
The second link in German can easily be translated just open up google chrome and paste in your link and it will automaticly offer to translate However all he has done is extended the Big black cable ( Switched Live ) to a free fuse position then the device feed goes on the other side of the fuse Th...
- Tue Aug 07, 2018 9:07 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Duplicating Car Key and Remote
- Replies: 12
- Views: 3706
Re: Duplicating Car Key and Remote
Please do let us know how you get on
I am interested as I too have a polo 9n3
but my instrument cluster is Magnetti Marelli
Component: KOMBIINSTRUMENT AGD V04
I would be interested to know if Vag com can read the pin as I would also like to have a spare key
Thanks
I am interested as I too have a polo 9n3
but my instrument cluster is Magnetti Marelli
Component: KOMBIINSTRUMENT AGD V04
I would be interested to know if Vag com can read the pin as I would also like to have a spare key
Thanks
- Sat Jul 21, 2018 8:29 am
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: 2006 Polo 1.2 Engine Problem
- Replies: 3
- Views: 1656
Re: 2006 Polo 1.2 Engine Problem
as well as the compression test suggested above I would be looking toward the ( system too lean ) as it could be causing the misfire errors System too lean can be caused by a vacuum leak when un metered air is being drawn in I think you can test this by spraying carburetter cleaner around the intake...
- Thu Jul 05, 2018 2:35 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: After market Radio upgrade
- Replies: 15
- Views: 11390
Re: After market Radio upgrade
Yeah wanted something original looking and it fitted the bill perfectly as a 50 something year old did not want anything too christmas tree looking or too complicated.
cheers
cheers